IDA8 Global-Net User Manual
136
© 2017, ATEÏS, member of PAX ProAV Group
3. Connect amplifier output to ''A" or X" and ''B'' or ''Y", 24 Vdc to " - RLY+" as shown on the
diagram.
3.1.17 Message Limitation
Each IDA8 has 8 x message channel sources, the following listed below are the components which will
be occupied by the usage number of the message channel sources.
Network Paging x 2
Voxnet Control x 2
VoIP x 1
DTMF VoIP x 1
Message Player x 1
MM Player x 1 - 2 (users defined)
Ethernet IGMP Audio Stream x 1
Fire Alarm x 1 - 4 (users defined)
Example:
If users use the [Networking Paging] component, the usage number of message channel sources will
be left 6 channel sources.
If the number of channel is beyond the max. of 8 x message channel sources, the [Compile] action
will be failed and display an error on the [Compile] window, see the picture below, then users need
to adjust and decrease the number of channel sources
.
3.1.18 Modify Audio Board
This function allows users to change the audio board which have been installed in the IDA8 processors.
In case that the audio board cannot successfully mapped with the connected hardware device, this
could avoid users not to re-mapping, re-edit the configuration once the audio boards are not the same.
