5-BUTTON LCD 2-WAY
QUICK START OPERATION GUIDE
5-BUTTON LCD 2-WAY
QUICK START OPERATION GUIDE
REPLACING YOUR REMOTE BATTERY
STEPS
REMOTE PART# BATTERY (QTY)
1) (551 only) Find the part # on the back of the remote to identify the battery.
2) (551 only) Locate the relief in case near the key chain and separate the case
halves to access & replace the batteries.
553
Rechargable
551
CR2032
SECURITY, KEYLESS ENTRY, & CONVENIENCE FUNCTIONS
FUNCTION
BUTTON(S)
REMOTE CONFIRMATION
NOTE
Lock & Arm*
“Lock”
or
”arm”
Displays
The doors will lock.
Unlock & Disarm*
“Unlock”
or
”D_Arm”
Displays
The doors will unlock.
Silent Lock*
x 1
Beep
The doors will lock with no audible confi rmation.
Silent Unlock*
x 2
Beep
Perform within 1 second. The doors will unlock with no
audible confi rmation.
Trunk/Hatch Release
for 3 sec.
“TRUNK OPEN”
Displays
By default, the system will also disarm/unlock.
Panic*
or for 3 sec.
“PANIC”
Displays
The system will sound the horn/siren for Panic Mode.
Register today
at www.
CarAlarm
.com
For warranty info & Download the latest operation guide.
Copyright 2019 Omega Research & Development Technologies, Inc. OC_55308_20190712
/c/omegard
/omegard
Problems? Questions? Contact Customer Service:
800-554-4053 (toll free) | +1-770-942-9876 (outside USA)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna., Increase the separation
between the equipment and receiver., Connect the equipment into an outlet on a circuit different from that to which the receiver is connected., Consult the dealer or an experienced radio/TV technician for help.,
Warning! Changes or modifi cations made to this equipment not expressly approved by the part responsible for compliance could void the use’s authority to operate the equipment
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifi cations to this equipment. Such modifi cations could void the user’s authority to operate the equipment.
1
4
PROGRAMMING REMOTES TO THE SYSTEM
Remote programming is dependant on the system being controlled. Please consult your dealer or the system guide for the proper
programming instructions.
Visit
www.
CarAlarm
.com
today
To Download the latest operation guide and learn more about system upgrades & other features!
OMPATIB
Scan to register
& download the
latest operation
guide at
CarAlarm.com!
