![background image](http://html1.mh-extra.com/html/omron/r88d-kn01h-ect-l/r88d-kn01h-ect-l_user-manual_744172568.webp)
Appendices
A - 122
G5-series Linear Motors/Servo Drives With Built-in EtherCAT Communications
Event name
Phase-A Connection Error
Event code
0814 0000 hex
Description
An error such as broken wiring was detected in the external encoder phase-A connection.
Source
EtherCAT Master Function Module
Source
details
Slave
Detection
timing
Continuously
Error
attributes
Level
Minor fault
Recovery
Error reset
(after cycling slave
power)
Log category
System
Effects
User program
Continues.
Operation
Power drive circuit is OFF for relevant slave.
Indicators
EtherNet/IP NET RUN
EtherNet/IP NET ERR
EtherNet/IP LINK/ACT
–
–
–
System
-defined
variables
Variable
Data type
Name
None
–
–
Cause and
correction
Assumed cause
Correction
Prevention
An error such as broken wiring
was detected in the external
encoder phase-A connection.
Wire phase A of the external
encoder correctly as shown in the
wiring diagram. If the cable is
broken, replace it.
Wire phase A of the external
encoder correctly as shown in the
wiring diagram.
Attached
information
None
Precautions/
Remarks
“55” is displayed on the Servo Drive front panel and F055 is given as the AlarmCode (4001 hex).
Event name
Phase-B Connection Error
Event code
0815 0000 hex
Description
An error such as broken wiring was detected in the external encoder phase-B connection.
Source
EtherCAT Master Function Module
Source
details
Slave
Detection
timing
Continuously
Error
attributes
Level
Minor fault
Recovery
Error reset
(after cycling slave
power)
Log category
System
Effects
User program
Continues.
Operation
Power drive circuit is OFF for relevant slave.
Indicators
EtherNet/IP NET RUN
EtherNet/IP NET ERR
EtherNet/IP LINK/ACT
–
–
–
System
-defined
variables
Variable
Data type
Name
None
–
–
Cause and
correction
Assumed cause
Correction
Prevention
An error such as broken wiring
was detected in the external
encoder phase-B connection.
Wire phase B of the external
encoder correctly as shown in the
wiring diagram. If the cable is
broken, replace it.
Wire phase B of the external
encoder correctly as shown in the
wiring diagram.
Attached
information
None
Precautions/
Remarks
“55” is displayed on the Servo Drive front panel and F155 is given as the AlarmCode (4001 hex).
Содержание R88D-KN01H-ECT-L
