Omron R88D-KN01H-ECT-L, Руководство пользователя

Страница: 21 / 626

19
Safety Precautions
G5-series Linear Motors/Servo Drives With Built-in EtherCAT Communications
Installation and Wiring
Provide the specified clearance between the Servo Drive and the inner surface of the
control panel or other equipment.
Fire or failure may result.
Use crimp terminals to wire screw type terminal blocks. Do not connect bare stranded wires
directly to terminals blocks.
Fire may result.
Provide safety measures, such as a breaker, to protect against short circuiting of external
wiring.
Fire may result.
Do not step on the Servo Drive or place heavy articles on it.
Injury may result.
Be sure to observe the mounting direction.
Failure may result.
Wire the cables correctly and securely.
Runaway motor, injury, or failure may result.
Tighten the mounting screws, terminal block screws, and cable screws for the product to
the specified torque.
Failure may result.
Use non-magnetic mounting screws. Note also that the depth of any mounted screw is less
than the effective thread depth.
Equipment damage may result.
Be sure to wire the motor coil unit cable fixedly.
Equipment damage may result.
For wiring between the Motor Coil Unit cable and the Servo Drive, use a robot cable.
Equipment damage may result.
Be sure to securely fix the Linear Motor to the machine.
The Linear Motor may come off during operation and equipment damage may result.
When installing the Linear Motor, match the center of gravity of the motor coil unit and load.
Malfunction or equipment damage may result by the increase of the running load.
Install linear guides with great caution to comply with the gap specification of the motor coil
unit and magnet track. (If the gap is small, the running load by the friction will increase in
proportion to the magnetic attraction force.)
Malfunction may result.
Do not allow foreign objects to enter between the Motor Coil Unit and Magnet Track.
Equipment damage or malfunction may result.
Caution