![background image](http://html1.mh-extra.com/html/omron/r88d-kn01h-ect-l/r88d-kn01h-ect-l_user-manual_744172235.webp)
7 - 9
7 Applied Functions
G5-series Linear Motors/Servo Drives With Built-in EtherCAT Communications
7-2 Po
sitive
and
Negat
ive Drive Pro
h
ibi
tion
Fu
nct
ion
s
7
*1
For details, refer to Stop Selection for Drive Prohibition Input (3505 hex) on page 7-9.
Precautions for Correct Use
Precautions for Correct Use
Both signals are disabled (in a state in which drive prohibition will not operation) in the default
settings. If prohibiting the drive input is required, set the Drive Prohibit Input Selection (3504 hex)
to either 0 or 2. The setting on the Input Signal Selection 1 to 8 (3400 to 3407 hex) can change
the logic and allocation for the respective Input terminals (CN1 to 7 and 8).
z
Stop Selection for Drive Prohibition Input (3505 hex)
Set the deceleration and stop methods upon a positive or negative drive prohibition input.
*1
If the Drive Prohibition Input Selection (3504 hex) is set to 2, a Drive Prohibition Input Error (Error No. 38.0) will
occur as soon as either the Positive or Negative Drive Prohibition Input becomes open. Therefore, regardless
of the set value, the subsequent operation will be performed according to the setting of the Fault reaction
option code (605E hex). In the same way, the Fault reaction option code (605E hex) takes priority when any
other error occurs.
Drive Prohibition
Input Selection
(3504 hex)
Description
0
Positive drive prohibition input and negative drive prohibition input enabled.
The operation when a signal is input is as follows.
•
Positive drive prohibition input shorted: Positive limit switch not operating and status
normal.
•
Positive drive prohibition input open: Positive direction prohibited and negative direction
permitted.
•
Negative drive prohibition input shorted: Negative limit switch not operating and status
normal.
•
Negative drive prohibition input open: Negative direction prohibited and positive direction
permitted.
The motor decelerates and stops according to the sequence set in Stop Selection for Drive
Prohibition Input (3505 hex).
*1
If the positive and the negative prohibition inputs are both open, a Drive Prohibition Input
Error 1 (Error No. 38.0) will occur because it is taken that Servo Drive is in error condition.
1
Positive drive prohibition input and negative drive prohibition input disabled.
2
Positive drive prohibition input and negative drive prohibition input enabled.
If either the positive or the negative prohibition input is open, a Drive Prohibition Input Error
1 (Error No. 38.0) will occur.
3504 hex
set value
*1
3505 hex
set value
Decelerating
*2
After stopping
Deceleration
method
Error
counter
Operation after stop
Error counter
0
0
Dynamic
Brake
Resistor
control
terminals
Clear
Force command is 0 for
drive prohibition direction
Hold
1
Free-run
Clear
Force command is 0 for
drive prohibition direction
Hold
2
Immediate
stop
*3
Clear
Force command and force
limit are as specified.
Clear after
deceleration
completes, then hold.
Содержание R88D-KN01H-ECT-L
