![background image](http://html1.mh-extra.com/html/omron/r88d-kn01h-ect-l/r88d-kn01h-ect-l_user-manual_744172591.webp)
A - 145
Appendices
G5-series Linear Motors/Servo Drives With Built-in EtherCAT Communications
A-3
S
y
smac Error Sta
tus
Cod
es
A
A-3
-2 Error Des
c
ription
Event name
Object Setting Error 2
Event code
3850 0000 hex
Description
External encoder ratio exceeded the allowable range.
Source
EtherCAT Master Function Module
Source
details
Slave
Detection
timing
Continuously
Error
attributes
Level
Minor fault
Recovery
Error reset
(after cycling slave
power)
Log category
System
Effects
User program
Continues.
Operation
Power drive circuit is OFF for relevant slave.
Indicators
EtherNet/IP NET RUN
EtherNet/IP NET ERR
EtherNet/IP LINK/ACT
–
–
–
System
-defined
variables
Variable
Data type
Name
None
–
–
Cause and
correction
Assumed cause
Correction
Prevention
External encoder ratio exceeded
the allowable range.
Correct the external encoder ratio
to between 1/40 and 160.
Set the external encoder ratio to
between 1/40 and 160.
Attached
information
None
Precautions/
Remarks
“93” is displayed on the Servo Drive front panel and F293 is given as the AlarmCode (4001 hex).
Event name
External Encoder Connection Error
Event code
3851 0000 hex
Description
The set value of the External Feedback Pulse Type Selection (3323 hex) differs from the external encoder
type that is connected for serial communications.
Source
EtherCAT Master Function Module
Source
details
Slave
Detection
timing
Continuously
Error
attributes
Level
Minor fault
Recovery
Error reset
(after cycling slave
power)
Log category
System
Effects
User program
Continues.
Operation
Power drive circuit is OFF for relevant slave.
Indicators
EtherNet/IP NET RUN
EtherNet/IP NET ERR
EtherNet/IP LINK/ACT
–
–
–
System
-defined
variables
Variable
Data type
Name
None
–
–
Cause and
correction
Assumed cause
Correction
Prevention
The set value of the External
Feedback Pulse Type Selection
(3323 hex) differs from the
external encoder type that is
connected for serial
communications.
Set the External Feedback Pulse
Type Selection (3323 hex)
according to the connected
external encoder type.
Set the External Feedback Pulse
Type Selection (3323 hex)
according to the connected
external encoder type.
Attached
information
None
Precautions/
Remarks
“93” is displayed on the Servo Drive front panel and F393 is given as the AlarmCode (4001 hex).
Содержание R88D-KN01H-ECT-L
