manualshive.com logo in svg

HP 49g+, Руководство пользователя, Страница: 428 / 862

Поделиться
Скачать
HP 49g+ Скачать руководство пользователя страница 428

 

 

Page 12-51 

ZINTG 

Zooms the graph so that the pixel units become user-define units.  For example, 
the minimum PICT window has 131 pixels.  When you use ZINTG, with the 
cursor at the center of the screen, the window gets zoomed so that the x-axis 
extends from –64.5 to 65.5. 
 

ZSQR 

Zooms the graph so that the plotting scale is maintained at 1:1 by adjusting 
the x scale, keeping the y scale fixed, if the window is wider than taller.  This 
forces a proportional zooming. 

 

ZTRIG 

Zooms the graph so that the x scale incorporates a range from about –3

π

 to 

+3

π

, the preferred range for trigonometric functions. 

 

Note

:  None of these functions are programmable.  They are only useful in 

an interactive way.  Do not confuse the command 

@ZFACT

 in the ZOOM menu 

with the function ZFACTOR, which is used for gas dynamic and chemistry 
applications (see Chapter 3).   

 

The SYMBOLIC menu and graphs

 

The SYMBOLIC menu is activated by pressing the 

P

 key (fourth key from 

the left in fourth row from the top of the keyboard).  This menu provides a list 
of menus related to the Computer Algebraic System or CAS, these are: 
 

    

 

 

All but one of these menus are available directly in the keyboard by pressing 
the appropriate keystroke combination as follows.  The Chapter of the user 
manual where the menus are described is also listed: 
 

 

Содержание 49g+































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов