HP 49g+ Скачать руководство пользователя страница 35

Страница: 35 / 862

Page 1-9

Let’s change the minute field to 25, by pressing:

!!@@OK#@

. The

seconds field is now highlighted. Suppose that you want to change the
seconds field to 45, use:

!!@@OK#@

The time format field is now highlighted. To change this field from its current
setting you can either press the

key (the second key from the left in the

fifth row of keys from the bottom of the keyboard), or press the

@CHOOS

soft

menu key (

•

If using the

key, the setting in the time format field will change to

either of the following options:

AM : indicates that displayed time is AM time

PM : indicates that displayed time is PM time

24-hr : indicates that that the time displayed uses a 24 hour

format where18:00, for example, represents 6pm

The last selected option will become the set option for the time format by
using this procedure.

•

If using the

@CHOOS

soft menu key, the following options are available.

Use the up and down arrow keys,

— ˜

, to select among these three

options (AM, PM, 24-hour time). Press the

!!@@OK#@

soft menu key to

make the selection.

Setting the date

After setting the time format option, the SET TIME AND DATE input form will
look as follows:

Содержание 49g+































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 49g+

Отзывы:

HP 49g+, Руководство пользователя, Страница: 35 / 862

Результаты поиска

Содержание 49g+

Отзывы: