HP 49g+, Руководство пользователя

Страница: 406 / 862

Page 12-29
Truth plots
Truth plots are used to produce two-dimensional plots of regions that satisfy a
certain mathematical condition that can be either true or false. For example,
suppose that you want to plot the region for X^2/36 + Y^2/9 < 1,
proceed as follows:
•
Press
„ô
, simultaneously if in RPN mode, to access to the PLOT
SETUP window.
•
Change
TYPE
to
Truth
.
•
Press
˜
and type {‘(X^2/36+Y^2/9 < 1)','(X^2/16+Y^2/9 > 1)’}
@@@OK@@@
to define the conditions to be plotted.
•
The cursor is now in the
Indep
field. Leave that as ‘X’ if already set to
that variable, or change it to ‘X’ if needed.
•
Press
L @@@OK@@@
to return to normal calculator display.
•
Press
„ò
, simultaneously if in RPN mode, to access the PLOT
window (in this case it will be called PLOT WINDOW – TRUTH window).
Let’s keep the default value for the window’s ranges:
H-View: -6.5 6.5,
V-View: -3.1 3.2
(To
reset them use
L @RESET
(select Reset all)
@@OK@@
L
).
Note
: if the window’s ranges are not set to default values, the quickest way
to reset them is by using
L @RESET@
(select Reset all )
@@@OK@@@ L
.
•
Press
@ERASE @DRAW
to draw the truth plot. Because the calculator samples
the entire plotting domain, point by point, it takes a few minutes to
produce a truth plot. The present plot should produce a shaded ellipse of
semi-axes 6 and 3 (in x and y, respectively), centered at the origin.
•
Press
@EDIT L @LABEL @MENU
to see the graph with labels. The window
parameters are such that you only see half of the labels in the x-axis.
Press
L
to recover the menu. Press
L @)PICT
to recover the original
graphics menu.
•
Press (
X,Y
) to determine coordinates of any point on the graph. Use the
arrow keys to move the cursor about the region plotted. At the bottom of
the screen you will see the value of the coordinates of the cursor as (X,Y).
•
Press
L @)CANCL
to return to the PLOT WINDOW environment. Then,
press
$
, or
L @@@OK@@@
, to return to normal calculator display.