manualshive.com logo in svg

HP 49g+, Руководство пользователя, Страница: 426 / 862

Поделиться
Скачать
HP 49g+ Скачать руководство пользователя страница 426

 

 

Page 12-49 

Zooming in and out in the graphics display 

Whenever you produce a two-dimensional FUNCTION graphic interactively, 
the first soft-menu key, labeled 

@)ZOOM

, lets you access functions that can be 

used to zoom in and out in the current graphics display.   The ZOOM menu 
includes the following functions (press 

L

to move to the next menu): 

    

 

 

 
We present each of these functions following.  You just need to produce a 
graph as indicated in Chapter 12, or with one of the programs listed earlier 
in this Chapter. 
 

ZFACT, ZIN, ZOUT, and ZLAST 

Pressing 

@)ZFACT

 produces an input screen that allows you to change the current 

X- and Y-Factors.   The X- and Y-Factors relate the horizontal and vertical user-
defined unit ranges to their corresponding pixel ranges.   Change the H-
Factor to read 8., and press 

@@@OK@@@

, then change the V-Factor to read 2., and 

press 

@@@OK@@

.  Check off the option 

Recenter on cursor

, and press 

@@@OK@@

.   

 
Back in the graphics display, press 

@@ZIN@  

.  The graphic is re-drawn with the 

new vertical and horizontal scale factors, centered at the position where the 
cursor was located, while maintaining the original PICT size (i.e., the original 
number of pixels in both directions).    Using the arrow keys, scroll 
horizontally or vertically as far as you can of the zoomed-in graph.   
 
To zoom out, subjected to the H- and V-Factors set with ZFACT, press 

@)ZOOM

  

@ZOUT

.  The resulting graph will provide more detail than the zoomed-in graph. 

You can always return to the very last zoom window by using 

@ZLAST

. 

Содержание 49g+































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов