Autodesk 00128-051462-9310 - AUTOCAD 2008 COMM UPG FRM 2005 DVD, Руководство пользователя

Страница: 857 / 2268

In-Place Editing of Curtain Wall Divisions
Use this procedure to edit divisions using in-place editing with the Edit Grid grip. With in-place editing, you can edit
the curtain wall directly and interactively in the drawing area, and later save the changes to the curtain wall or curtain
wall style. For more information, see “
Division of Curtain Wall Grids ” on page 765.
1 Select a curtain wall on which you want to edit divisions with in-place editing.
2 Specify the mode in which to edit the curtain wall:
Then … If you want to edit …
right-click, and click Design Rules
➤
Transfer to Object.
this instance of the curtain wall
right-click, and click Design Rules
➤
Revert to Style Design
Rules. If this option is not available, the design rules are
already style-based for the curtain wall.
the curtain wall style
3 Click the Edit Grid grip.
4 Enter d (Division in place) and press ENTER.
Viewing edit in-place grips for a primary division
NOTE You have entered the in-place editing session now. You can see this from the faded color of all objects in
the drawing, as well as from the different grips at your disposal. Note that while you are in the in-place editing
session, you have only limited editing access to other commands in the drawing. Before working on other objects,
you should first end the in-place editing session.
Viewing edit in-place grips for adding and removing bays
5 Edit the division:
Then … If you want to …
click the Add Bay grip. add a bay to the grid
click the Remove Bay grip. remove a bay from the grid
select the Start Offset grip and move it to the appropriate
position. change the start offset of the grid
Overriding Curtain Wall Divisions | 817