background image

CyTime

TM

 Event Manager

EM-100

Quick Start Guide

Cyber Sciences, Inc. (CSI)

229 Castlewood Drive, Suite E

Murfreesboro, TN  37129  USA

Tel: +1 615-890-6709   

Fax: +1 615-439-1651

The service marks, CyTime, and the Cyber Sciences stylized logo are trademarks 

of Cyber Sciences. All other trademarks are the property of their respective 

owners.

HO-EM-02  

March -2020

For More Information on the CyTime Event Manager 

Visit: www.cyber-sciences.com

Software Setup

The CyTime Event Manager must be connected to the 

system network for it to recognize the Sequence of Event 

recorders on that network.

Step 1: Log into the static IP address associated with 

the device. (The default IP address is: 169.254.1.10)
Step 2: The default User Name is: ‘admin’. The default 

Password is: ‘csi_(numeric portion of serial number).
Step 3: Navigate to the ‘Setup’ page

 (figure 6)

. Enter 

the IP credentials of your network, and hit ‘Apply’. The 

CyTime Event Manager will then re-boot. Once the unit 

has re-booted, log into the unit. Return to the setup 

screen to continue the setup process.

Figure 6. Setup Page

Figure 7. System Screen

For more detailed information about the CyTime Event Manager, refer to 

the Event Manager Instruction Bulletin (IB-EMS-01), found at: 

www.cyber-sciences.com/our-support/tech-library

.

EMS-100

CyTime Event Manager

Network

Step 4: Select the ‘Time’ button

 

on the left side of the 

‘Setup’ page to set up the time clock. Select the proper 

time synch options and protocols, then select the 

‘Apply’ button.

Step 5: The CyTime Event Manager must locate and 

communicate with all the Sequence of Event Recorders 

(SERs)

 on the network. There are 3 ways in which to 

identify the SERs on the Event Manager. First, make sure 

you’re on the ‘Setup’ screen.
     1. ‘Auto Discover’ - Select the ‘Auto Discover’ tab, this 

selection will automatically identify any SERs located on 

the network. Type in an IP range, and select ‘Add Route 

to List’.
     2. Select the ‘Devices’ tab. Here the user can manually 

set up each SER on the network by entering it’s corre-

sponding IP address.
     3. Select the ‘Devices’ tab. Select the ‘Import’ button, 

and upload a .csv file with a list of unit IP addresses.
Step 6: Once the SER devices have been located on the 

network, you can go to the ‘System’ page. Here you will 

have a visual representation of all the SER devices on 

the network. 

(figure 7).

Figure 5

Отзывы: