Autodesk 00128-051462-9310 - AUTOCAD 2008 COMM UPG FRM 2005 DVD, Руководство пользователя

Страница: 384 / 2268

1 Click File menu
➤
Project Browser.
2 Select the project into which you want to copy standards, right-click, and click Project Properties.
3 In the Modify Project dialog box, click Configure next to Project Standards.
4 Click the Standard Styles tab.
5 Click .
6 In the Select Project dialog box, select the project file (APJ) from which you want to copy project standards,
and then click Open.
7 Select the copy settings.
Then… If you want to…
click Remove existing settings. overwrite the existing project standards with the
copied project standards
click Append copied settings to existing settings.
Existing settings that are inconsistent with the copied settings will be
replaced with the copied settings. add the project standards from the selected project
to any existing project standards
8 Click OK twice.
Enabling Project Standards for a Project
After defining the standards for a project, you need to enable them to make them active within the project.
While you are still working on setting up the standards for a project, you might not want the standards to be activated
in the project right away, as standards styles might still be added, removed, or changed. Once the setup is complete,
however, you must enable the standards for the project.
1 Select the project for which you want to enable project standards, right-click, and click Project Properties.
2 In the Modify Project dialog box, click Configure next to Project Standards.
3 Select Enable project standards for project <Project Name>.
4 Click OK twice.
The selected synchronization behavior (automatic, semi-automatic, or manual) is now activated.
344 | Chapter 7 Project Standards