Autodesk 00128-051462-9310 - AUTOCAD 2008 COMM UPG FRM 2005 DVD, Руководство пользователя

Страница: 1001 / 2268

3 Select the frame or mullion edge you want to override.
4 Create the override:
Then… If you want to…
select a new edge definition from the list. exchange the existing edge for another
select Remove. remove the frame or mullion edge
5 Click OK.
6 Specify where you want to save the door/window assembly override:
Then… If you want to…
no further steps are necessary. The override is saved to the
door/window assembly. For information about how to remove
an override from a door/window assembly, see
“ Creating a
Division Override ” on page 965 .
save the override only on this specific door/window assembly
select the door/window assembly, right-click, and select
Design Rules
➤
Transfer to Object.
save the override to a door/window assembly style
7 If you have chosen to save the override to a door/window assembly style, select the door/window assembly
again, right-click, and click Design Rules
➤
Save to Style and decide to which door/window assembly style
you want to save the override.
Then… If you want to…
select Transfer Edge Overrides to Style, and click OK.
NOTE If you have created only a frame or mullion edge
override, only the Transfer Edge Overrides to Style check box
is active. If you have also created other overrides, such as a
cell merge or a division override, these check boxes are
available as well. If you also want to save these overrides to
the style, select their check boxes too.
save the override to the current door/window assembly style
select Transfer Edge Overrides to Style, and click New. Then,
enter a name for the new door/window assembly style, and
click OK.
NOTE If you have created only a frame or mullion edge
override, only the Transfer Edge Overrides to Style check box
is active. If you have also created other overrides, such as a
cell merge or a division override, these check boxes are
available as well. If you also want to save these overrides to
the style, select their check boxes too.
save the override to a new door/window assembly style
NOTE If you do not want to save the override back to a style at all, right-click, and click Design Rules
➤
Revert
to Style Design Rules. The overrides remain on the door/window assembly, where they can be removed as
described in
“ Creating a Division Override ” on page 965 , but they are not saved back to a door/window assembly
style.
Creating a Frame or Mullion Edge from a Polyline or Profile Using In-Place Editing
Use this procedure to assign a profile to a vertical edge of a frame or mullion. The profile can be any profile or any
closed polyline that you specify. You can use a profile edge to create a unique corner in situations where a simple miter
is not sufficient.
Using Overrides in Door and Window Assemblies | 961