Autodesk 00128-051462-9310 - AUTOCAD 2008 COMM UPG FRM 2005 DVD, Руководство пользователя

Страница: 1387 / 2268

Then… If you want to…
select Solid Fill for Type. specify solid fill
6 Click OK.
7 Click the setting for Scale/Spacing, and enter a value that determines how the selected pattern is repeated.
8 Click the setting for Angle, and enter the angle for the selected pattern.
9 Click the setting for Orientation, and specify how the hatching is oriented:
Then… If you want to…
select Object. orient the hatching to the slab/roof slab, regardless of its
rotation
select Global. orient the hatching to the World Coordinate System
10 Click the setting for X Offset, and enter an offset value.
11 Click the setting for Y Offset, and enter an offset value.
12 Click OK twice.
Specifying the Cut Plane Height of a Slab/Roof Slab
Use this procedure to specify the cut plane height of a slab or roof slab.
If the value you specify for the cut plane height is greater than zero, you must specify the layer, color, and linetype for
the elements above and below the cut plane height. This is especially important for slabs/roof slabs with interference
conditions or body modifiers.
To change the cut plane height for all slabs/roof slabs of the same style, see “ Specifying the Cut Plane Height of a
Slab/Roof Slab Style ” on page 1359.
1 Select the slab or roof slab you want to change, right-click, and click Edit Object Display.
2 Click the Display Properties tab.
3 Select the display representation on which to display the changes, and select Style Override.
4 If necessary, click .
5 Click the Other tab.
6 Select Override Display Configuration Cut Plane, and enter a value for Cut Plane Height.
7 Click OK twice.
Creating a Clipped Gable Roof
Use this procedure to modify two roof slabs to add a third slab, creating a clipped gable roof.
1 Create a gable roof with two roof slabs.
2 In an isometric view, draw a 3D polyline in the shape and location of the clipped roof slab.
3 Enter roofslab.
4 Enter e (Edit).
5 Enter x (Xcut).
6 Select the two roof slabs and press
ENTER
.
7 Select the 3D polyline and press
ENTER
twice.
Creating a Clipped Gable Roof | 1347