Timewave PK-900 Operating Manual Download Page 104

Page: 104 / 392

signals with the SIGNAL IDENTIFICATION (SIAM) mode. However, you can

manually step through all the available RTTY receiving speeds with the

RBAUD command.

The following "Function Keys" and immediate commands are included for

Baudot RTTY operating convenience.

Immediate Commands from the Command Mode:

"L" Forces LETTERS case in receive.

"N" Forces FIGURES case in receive.

"R" Switches system to receive mode, forces LETTERS case.

"X" Switches system to transmit mode and forces immediate

entry into Converse mode.

"K" Go to CONVERSE Mode in order to load Transmit type

ahead buffer.

"Function Key" characters embedded in transmitted text:

<CTRL-B> Sends AAB string as a HEREIS message.

<CTRL-E> Sends "Who Are You" request to distant station.

<CTRL-O> Sends LETTERS shift character.

<CTRL-N> Sends FIGURES shift character.

<CTRL-D> Shuts off transmitter after sending character buffer.

<CTRL-F> Sends call sign in Morse and shuts off transmitter.

<CTRL-T> Sends the Time if the DAYTIME clock has been set.

6.5.1 Changing Speed

Assume you've been receiving at 45 bauds and wish to increase the baud

rate in steps. From the Command mode, type RB U (Up) followed by an

<Enter>. The PK-900 responds with:

RBaud was 45

RBaud now 50

The RBAUD command sets the Baudot RTTY speed. The most common speed

is 45 bauds on HF, but other speeds including commercial speeds are

supported. See the Command Summary for all the supported speeds.

6.5.2 Formatting Your Transmitted and Received Text

The default configuration of the PK-900 RTTY parameters are set for

natural conversation and traffic. Sometimes it is desired to alter

how your text looks on the screen of the station you are talking to.

The commands ACRRTTY and ALFRTTY allow for customizing the Carriage

Return and Linefeed characters in your transmitted text.

To allow for changing how received text is displayed on your screen or

printer, see the ACRDISP and ALFDISP commands in the Command Summary.

MARS operators have some special requirements for RTTY operation and

displaying text. To accommodate these, the CRADD and MARSDISP

commands are included and should be reviewed in the Command Summary.

1/93 6-6

Summary of Contents for PK-900









































































































































































































































































































































































































Search results

Summary of Contents for PK-900

Reviews:

Related manuals for PK-900

Brands by name

Popular brands

Timewave PK-900, Operating Manual

Search results

Summary of Contents for PK-900

Reviews:

Related manuals for PK-900

Brands by name

Popular brands