manualshive.com logo in svg

Timewave PK-900, Operating Manual, Page: 183 / 392

Share
Download
Timewave PK-900 Operating Manual Download Page 183

 

A.4.2     General Error Messages 

 

          An error message is displayed if the PK-900 does not understand what  

          you typed, or needs more information.  If you see an Error message,  

          look up the Command to make sure you are entering it properly. 

 

          ?What? 

 

          Your first entry is not a command or a command abbreviation - your  

          PK-900 did not understand your instructions! 

 

          ?bad 

 

          You typed a command name correctly, but the remainder of the command  

          line was not understood. 

 

          ?callsign 

 

          You typed a call sign that does not meet the PK-900's requirements. 

 

          ?clock not set 

 

          You typed the command DAYTIME, but you haven't yet set the clock! 

 

          ?not enough 

 

          You didn't type enough arguments for a command that needs several. 

 

          ?range 

 

          You typed a numeric argument too large or too small for that command. 

 

          ?too many 

 

          You typed too many arguments for the command to accept. 

 

          ?too long 

 

          You typed a command line that is too long.  For example, if you type a  

          BTEXT or CTEXT message that is too long you'll receive this message.   

 

          ?need ALL/NONE/YES/NO 

 

          This message indicates you have forgotten the ALL, NONE, YES or NO  

          parameter in the CFROM, DFROM or MFROM commands. 

 

          *** Transmit data remaining 

 

          If the PK-900 is commanded back to receive with the RCVE command  

          when it still has data in the transmit buffer waiting to be sent. 

 

          not while in (MODE) 

 

          This message will appear any time you try to do something that is not  

          permitted in the current PK-900 operating mode. 

 

 

 

1/93                                   A-5 

Summary of Contents for PK-900









































































































































































































































































































































































































Reviews:

No comments