manualshive.com logo in svg

Timewave PK-900, Operating Manual, Page: 169 / 392

Share
Download
Timewave PK-900 Operating Manual Download Page 169

 

11.9.2    Settings For PACTOR MailDrop Operation 

 

          Before a remote PACTOR user can access your MailDrop, be certain that  

          MYPTCALL and MYCALL (on Port 1) are set to your Amateur callsign. 

 

11.9.3    Starting PACTOR MailDrop Operation 

 

          Remote access to your PACTOR MailDrop is controlled by the command   

          TMAIL which is short for TOR MAIL.  The TMAIL command controls remote  

          access to the PACTOR and AMTOR MailDrop in the same way that the  

          MAILDROP command controls remote Packet access. 

 

          Turn the TMAIL command ON (default OFF) to allow remote stations to  

          access your MailDrop in ARQ PACTOR.  Turn TMAIL OFF to have normal ARQ   

          QSOs with other stations in the PACTOR mode. 

 

11.9.4    Local Logon to the MailDrop 

 

          To locally access your MailDrop use the MDCHECK command as described  

          in chapter 5 of this manual on MailDrop operation. 

 

11.9.4.1  Remote Logon to your PACTOR MailDrop 

 

          The PACTOR maildrop user interface is slightly different from the  

          packet interface due to the differences between the two modes. 

 

          When a station links with your PACTOR MailDrop, your PK-900 first   

          identifies your maildrop by sending the amount of free MailDrop  

          memory as shown below: 

 

                    Type H for help. 

                    (AEA PK-900) 17528 FREE. 

 

          The PK-900 then sends the user the MTEXT string if the MailDrop 

          Message command (MMSG) is ON.  The Default text is shown below: 

 

                    Welcome to my AEA PK-900 maildrop. 

                    Type H for help. 

 

11.9.5    Caller Prompts 

 

          The command prompt that the MailDrop sends the remote user in PACTOR  

          is similar to that used in the Packet mode and is shown below: 

 

               WX7BBB DE WX7AAA (A,B,H,J,K,L,R,S,V,?) > 

 

          As in packet, MDPROMPT is the PACTOR MailDrop message prompt sent to 

          a remote station by your MailDrop.  The default prompt is: 

 

               Subject:/Enter Message,^Z (CTRL-Z) or /EX to End 

 

          Text before the first slash is sent to the user as the subject prompt;   

          text after the first slash is sent as the message text prompt. 

 

 

 

 

 

3/93                                   11-13 

Summary of Contents for PK-900









































































































































































































































































































































































































Reviews:

No comments