manualshive.com logo in svg

Timewave PK-900, Operating Manual, Page: 231 / 392

Share
Download
Timewave PK-900 Operating Manual Download Page 231

________________________________________________________________________________ 

     HBaud "n/n"                                    Default: 1200/1200 bauds 

     Mode: Packet                                      Host: HB 

_________________________________ Parameters: __________________________________ 

 

"n"  -    values specifying the Packet data rate in bits per second from each  

          Radio Port of the PK-900 to the radio. 

________________________________________________________________________________ 

 

HBAUD sets the radio ("on-air") baud rate only in the Packet operating mode for  

each Radio Port.  The default is 1200 bits/sec (VHF) for Radio Port 1 and 0  

(disabled) on Radio Port 2. 

 

HBAUD has no relationship to your computer terminal program's baud rate. 

Available HDLC packet data rates "n" include 45, 50, 57, 75, 100, 110, 150, 200,  

300, 400, 600, 1200, 2400, 4800 and 9600 bauds. 

 

 

________________________________________________________________________________ 

     HEAderln ON|OFF                                             Default: ON 

     Mode: Packet                                                Host: HD 

_________________________________ Parameters: __________________________________ 

 

ON   -    The header in a monitored packet is printed on a separate line from  

          the text. 

OFF  -    The header and text of monitored packets are printed on the same line. 

________________________________________________________________________________ 

 

When HEADERLN is ON (default), the address is shown, followed by a <CR><LF> that  

puts the packet text on a separate line as shown below: 

 

     WX1AAA>WX2BBB: 

     Go ahead and transfer the file. 

 

HEADERLN affects the display of monitored packets.  When HEADERLN is OFF, the  

address information is shown on the same line as the packet text as shown below: 

 

     WX1AAA>WX2BBB: Go ahead and transfer the file. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1/93                                   A-53 

Summary of Contents for PK-900









































































































































































































































































































































































































Reviews:

No comments