manualshive.com logo in svg

Timewave PK-900, Operating Manual, Page: 112 / 392

Share
Download
Timewave PK-900 Operating Manual Download Page 112

 

          Now you want to let WX7EEE on VHF know that you are there, but that  

          you are involved in another QSO on HF.  This way he will understand  

          that it may take you a little longer to respond to his packets.  

          Before you can send data to Radio Port 2, you must enter Converse Mode   

          with the "k" command and then switch to this Port with "|A" or the  

          text you type will be sent to Radio Port 1 on RTTY the next time you  

          enter the transmit command "x". 

 

          You receive a transmission from Jim on HF RTTY telling you he needs to  

          sign off to go to bed.  The "0:" in front of the text shows this was  

          received on Radio Port 1. 

        

          Now you want to sign off with Jim on HF.  Again, first you must switch  

          to Radio Port 1 with the "|0" since your last transmission was  

          directed to Port 2.  After this you must enter the command mode of the  

          PK-900 by sending a <CTRL-C> and then place Port 1 into RTTY 

          transmit with the "x" command.  Now you can make your final  

          transmission to Jim ending with his callsign followed by your  

          callsign.  As before, when you are through typing your text, you send  

          a <CTRL-D> to the PK-900 which returns Radio Port 1 to receive after  

          the text has been sent. 

 

6.7.4     More Thoughts on Port Switching 

 

          One problem of having more than one Radio Port is remembering which  

          port you are currently using.  In the dual port sample QSOs above,  

          this was  not a problem, but after it has been hours or days since you  

          have used your PK-900, you may forget which port you last used. 

 

          With AEA Pakratt Software programs, the on-screen status will always  

          show which port you are using so this is not a problem.  With other  

          programs, you will have to query the PK-900 with the CSTATUS SHORT  

          command.  The CSTATUS command displays the status of the logical  

          channels of Port 1 and Port 2 of the PK-900.  The CSTATUS SHORT  

          command displays the status of the active channel and any packet  

          channels that are connected.  After completing the sample QSOs above,  

          the PK-900 would display the following. 

 

               cmd:CSTATUS S 

 

               Ch. A - IO DISCONNECTED 

 

          This reminds you that Channel A is your current I/O channel.  Any text  

          that you type in the Converse mode will be sent to channel A on Radio  

          Port 2.  If you had been connected to any other packet stations, the  

          callsign and channel would have also shown in the display. 

 

          Sometimes you might not want to be bothered with anything from the  

          Radio Port you are not using.  For these times either Radio Port may  

          be turned OFF with the RADIO command.  For example, let's say that in  

          the above example QSO you wanted to work HF packet and did not want to  

          be interrupted with any VHF connects.  Typing the following command  

          would cause Radio Port 2 to be disabled. 

 

               cmd:RADIO /0  or RADIO /OFF 

               RAdio  was  1/2 

               RAdio  now  1/0 

 

1/93                                    6-14 

Summary of Contents for PK-900









































































































































































































































































































































































































Reviews:

No comments