manualshive.com logo in svg

Timewave PK-900, Operating Manual, Page: 286 / 392

Share
Download
Timewave PK-900 Operating Manual Download Page 286

________________________________________________________________________________ 

     WIdeshft  ON|OFF                                       Default: OFF 

     Mode:  All                                             Host:  WI  

________________________________________________________________________________ 

 

The WIDESHIFT command allows backwards compatibility with hostmode software 

designed for use with the PK-232.  This command coupled with the QWIDE 

command selects a modem for wide shift operation such as 850 Hz shift used 

on some VHF data repeaters.  Some MARS stations use 850 RTTY on HF.  Wide 

shift must not be used on AMTOR. 

 

 

________________________________________________________________________________ 

     WOrdout ON|OFF                                              Default: OFF 

     Mode: Baudot, ASCII, AMTOR, PACTOR and Morse                Host: WO 

_________________________________ Parameters: __________________________________ 

 

ON  -     Typed characters are held in the transmit buffer until a space, CR,  

          LF, TAB, RECEIVE, CWID, ENQ or +? character(s) is typed. 

OFF -     Typed characters are sent directly to the transmitter. 

________________________________________________________________________________ 

 

Use the WORDOUT Command to choose whether or not you can edit while entering  

text for transmission. 

 

When WORDOUT is ON, each character you type is held in a buffer until you type a  

space, a carriage return, a line feed, ENQ character ($05, <CTRL-E>) or the +?.   

You can edit words before the transmit buffer's contents are sent to the radio. 

When WORDOUT is OFF, each character you type is sent to the radio just as you  

typed it, without any delay. 

 

 

________________________________________________________________________________ 

     WRu ON|OFF                                                  Default: OFF 

     Mode: Baudot, ASCII                                         Host: WR 

_________________________________ Parameters: __________________________________ 

 

ON    -   Your Auto-AnswerBack is sent after a distant station's WRU? 

OFF   -   Your Auto-AnswerBack is NOT sent after a distant station's WRU? 

________________________________________________________________________________ 

 

Use the WRU command in Baudot and ASCII to enable or disable your PK-900's  

Automatic-AnswerBack feature. 

 

When WRU is ON, your PK-900 sends the AnswerBack on receipt of a distant  

station's WRU? request ("FIGS-D" or "$" in Baudot or a <CTRL-E> in ASCII).   

Your PK-900 keys your transmitter, sends the text stored in the AnswerBack  

field (AAB), then unkeys your transmitter and returns to receive. 

 

The WRU function is defaulted ON in AMTOR as per the CCIR recommendation.   

It is also defaulted on in PACTOR.  To allow for special applications where it  

may be helpful to disable the WRU function in AMTOR or PACTOR, User Bit 9  

(UBIT 9) command controls this feature. 

 

 

 

 

 

 

1/93                                   A-108 

Summary of Contents for PK-900









































































































































































































































































































































































































Reviews:

No comments