Timewave PK-900 Operating Manual Download Page 240

Page: 240 / 392

________________________________________________________________________________

MBEll ON|OFF/ON|OFF Default: OFF/OFF

Mode: Packet Host: ME

_________________________________ Parameters: __________________________________

ON - Will send 3 BELL characters to the terminal when the callsign(s) of

the station(s) monitored match the MFROM and MTO lists.

OFF - The PK-900 will not send BELL characters to the terminal due to

MONITORED packets.

________________________________________________________________________________

MBELL can be used to alert the user to the presence of particular packet

station(s) on the frequency. For example if you want to be alerted when N7ML

appears on Radio Port 2 you would set the following:

MBELL ON

MONITOR 0/4

MFROM yes N7ML

MTO NONE

When MBELL is ON, packets from and to all stations are displayed, but only those

packets matching the MFROM and MTO lists cause the bell to ring.

________________________________________________________________________________

MBx call1[,call2][-"n"][ALL] Default: none

Mode: Packet Host: MB

_________________________________ Parameters: __________________________________

call - The call signs of one or two stations to be monitored.

"n" - 0 to 15, indicating an optional SSID.

________________________________________________________________________________

The MBX command permits you to read or record useful or needed data without

having to connect or log on to the source station(s).

MBX filters the received packet data so that only packets from the selected

station(s) are shown, without headers or repeated frames. MBX overrides normal

monitor functions and can show one or both sides of a conversation.

The operation of MBX command is as follows:

MBX NONE (Default) All monitored frames are shown with their headers.

MBX ALL Only the data fields in the I-frames and UI frames are shown.

Data from retried frames will be shown each time such a frame is

monitored. The MFROM and MTO commands are active.

MBX CALL 1 Only the data in the I and UI frames to or from CALL 1 are shown.

CALL 1 can be either the source or destination station. Retried

frames are not shown. The MFROM and MTO commands are ignored.

MBX CALL 1, Only the data in the I and UI frames are shown when CALL 1 is the

CALL 2 source and CALL 2 is the destination or vice-versa. Retried

frames are not shown. The MFROM and MTO commands are ignored.

A packet connection on any channel inhibits monitoring, if MBX is not set to

"none". MCON will only work if MBX is set to "none".

Clear MBX with "%" "&" "N" "NO" "NONE" or "OFF" as arguments.

1/93 A-62

Summary of Contents for PK-900









































































































































































































































































































































































































Search results

Summary of Contents for PK-900

Reviews:

Related manuals for PK-900

Brands by name

Popular brands

Timewave PK-900, Operating Manual

Search results

Summary of Contents for PK-900

Reviews:

Related manuals for PK-900

Brands by name

Popular brands