manualshive.com logo in svg

Timewave PK-900, Operating Manual, Page: 192 / 392

Share
Download
Timewave PK-900 Operating Manual Download Page 192

________________________________________________________________________________ 

     AFilter ON|OFF                                              Default: OFF 

     Mode: ALL                                                   Host: AZ 

_________________________________ Parameters: __________________________________ 

 

ON  -     The ASCII characters specified in the MFILTER are filtered out and  

          never sent to the terminal or computer. 

OFF -     Characters in MFILTER list are only filtered from monitored packets. 

________________________________________________________________________________ 

 

Some terminals and computers use special characters to clear the screen or  

perform other "special" functions.  Placing these characters in the MFILTER  

list, and turning AFILTER ON will keep the PK-900 from sending them. 

 

Exception:  When ECHO is ON, and the terminal or computer sends a filtered  

character, the PK-900 will echo it back to the terminal or computer. 

 

AFILTER works regardless of mode, or CONNECT/CONVERSE/TRANSPARENT status.   

One must be careful to leave AFILTER OFF during Binary file transfers. 

 

 

________________________________________________________________________________ 

     ALFDisp ON|OFF                                              Default: ON 

     Mode: All                                                   Host: AI 

_________________________________ Parameters: __________________________________ 

 

ON   -    A line feed character <LF> IS sent to the terminal after each <CR>. 

OFF  -    A <LF> is NOT sent to the terminal after each <CR>. 

________________________________________________________________________________ 

 

ALFDISP controls the display of carriage return characters received, as well as  

the echoing of those that are typed in. 

 

When ALFDISP is ON (default), your PK-900 adds a line feed <LF> to each  

carriage return <CR> received, if needed.  If a line feed was received either  

immediately before or after a carriage return, ALFDISP will not add another line  

feed.  Use the PK-900's sign-on message to determine how carriage returns are  

being displayed.  ALFDISP affects your display; it does not affect transmitted  

data. 

 

Set ALFDISP ON if the PK-900's sign-on message lines are typed over each  

other.  Set ALFDISP OFF if the PK-900's sign-on message is double spaced. 

ALFDISP is set correctly if the PK-900's sign-on message is single spaced.   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1/93                                   A-14 

Summary of Contents for PK-900









































































































































































































































































































































































































Reviews:

No comments