manualshive.com logo in svg

Timewave PK-900, Operating Manual, Page: 252 / 392

Share
Download
Timewave PK-900 Operating Manual Download Page 252

________________________________________________________________________________ 

     MYGate call[-"n"]                                           Default: none 

     Mode: Packet                                                Host: MY 

_________________________________ Parameters: __________________________________ 

 

call -    The Call Sign you wish to use for the Gateway. 

"n"  -    Numeral indicating an optional substation ID (SSID) or extension. 

________________________________________________________________________________ 

 

Call is the call sign of the Gateway, default "none." 

 

"Call" may have an optional SSID, and must not be the same call sign and SSID as  

MYCALL or MYMAIL.  When another station digipeats via the callsign set in  

MYGATE, your PK-900 will provide Gateway operation between Radio Port 1 and  

Radio Port 2 provided both ports are enabled for Packet operation.   

See Chapter 4 for details of Gateway operation and limitations. 

 

 

________________________________________________________________________________ 

     MYMail call[-"n"]                                           Default: none 

     Mode: Packet, PACTOR/MailDrop                               Host: Ma 

_________________________________ Parameters: __________________________________ 

 

call -    The Call Sign you wish to use for the MailDrop. 

"n"  -    Numeral indicating an optional substation ID (SSID) or extension. 

________________________________________________________________________________ 

 

Call is the call sign of the MailDrop, default "none." 

 

"Call" may have an optional SSID, and must not be the same call sign and SSID as  

MYCALL.  If you do not set MYMAIL, the MailDrop will use the same call sign and  

SSID as entered in MYCALL.  For example, if you have set MYCALL to N7ML then  

MYMAIL may be N7ML-1 through N7ML-15.  You can use the CTEXT and MTEXT messages  

to inform other stations who connect of your MYCALL and MYMAIL call signs. 

 

 

_________________________________________________________________________________ 

     MYPTcall  call                                              Default: PK900 

     Mode:  PACTOR                                               Host: Mf     

________________________________________________________________________________ 

 

Use the MYPTCALL comand to load your call sign into your PK-900.  Only radio  

port 1 will operate on PACTOR.   

 

If you have not loaded a call into the PK-900 with MYPTCALL the call loaded   

in MYCALL will be used.  The difference between MYCALL and MYPTCALL is that 

MYCALL allows only the dash (-) to be used while MYPTCALL will allow any 

punctuation with the call. 

 

If calls have not been loaded into either MYCALL  or MYPTCALL, the PK-900 will 

not allow transmission on PACTOR.  An error message "Need MYCALL" will be  

displayed if transmission is attempted. 

 

 

 

 

 

 

 

3/93                                   A-74 

Summary of Contents for PK-900









































































































































































































































































































































































































Reviews:

No comments