Timewave PK-900 Operating Manual Download Page 254

Page: 254 / 392

________________________________________________________________________________

NAVStn all, none, Yes\No (letters) Default: All

Mode: NAVTEX Host: NS

_________________________________ Parameters: __________________________________

letters - all, none, YES List, NO List. List of up to 13 letters which

may or may not be separated by spaces, commas or TABs.

_______________________________________________________________________________

The NAVSTN command uses letter arguments to determine which NAVTEX transmitting

stations the PK-900 will print. NAVTEX transmitters are identified by the 26

letters of the alphabet A-Z. The NAVSTN Command allows ALL, NONE or a list of

up to 13 letters representing NAVTEX transmitting stations to be Monitored or

Rejected.

NAVSTN may be cleared with "%" "&" or "OFF" as arguments.

________________________________________________________________________________

NAvtex Immediate Command

Mode: All Host: NA

________________________________________________________________________________

NAVTEX is an immediate command that switches Radio Port 1 of your PK-900 into

the NAVTEX receive mode. The PK-900 can accept only, or lock-out certain

message classes and transmitting stations with the NAVMSG and NAVSTN commands

described above.

For logging purposes, NAVTEX mode uses the setting of DAYTIME to print the

date and/or time in front of the preamble if MSTAMP and DAYSTAMP are ON.

________________________________________________________________________________

NEwmode ON|OFF Default: ON

Mode: All Host: NE

_________________________________ Parameters: __________________________________

ON - The PK-900 automatically returns to the Command Mode at disconnect

or return to receive.

OFF - The PK-900 does not return to Command Mode at disconnect or return

to receive.

________________________________________________________________________________

Your PK-900 always switches to a data transfer mode at the time of connection,

unless NOMODE is ON. NEWMODE determines how your PK-900 behaves when the link

is broken or when the state is changed from Transmit to Receive with the RECEIVE

or CWID characters.

When NEWMODE is ON (default) and the link is disconnected, or if the connect

attempt fails, your PK-900 returns to Command Mode. If NEWMODE is OFF and the

link is disconnected, your PK-900 remains in Converse or Transparent Mode

unless you have forced it to return to Command Mode.

1/93 A-76

Summary of Contents for PK-900









































































































































































































































































































































































































Search results

Summary of Contents for PK-900

Reviews:

Related manuals for PK-900

Brands by name

Popular brands

Timewave PK-900, Operating Manual

Search results

Summary of Contents for PK-900

Reviews:

Related manuals for PK-900

Brands by name

Popular brands