manualshive.com logo in svg

Timewave PK-900, Operating Manual, Page: 50 / 392

Share
Download
Timewave PK-900 Operating Manual Download Page 50

 

          The following Beacon packet is intended as identification for a  

          NET/ROM level-3 packet networking switch. 

 

                    p1 N7HWD-8*>ID: 

                    NET/ROM 1.3 (SEA) 

 

          In this case, the Packet Switch is using the callsign N7HWD-8, but  

          also uses the alias SEA as a callsign.  There are many types of Packet  

          Switches now in use, but NET/ROM is one of the most popular.  We will  

          briefly discuss using a NET/ROM switch later in this chapter since  

          most switches operate in much the same way. 

 

 

          The packet below was sent by the network switch SEA to N7ML. 

 

                    p1 SEA*>N7ML: 

                    SEA:N7HWD-8> Connected to #SEA:N7HWD-7 

 

          The packet above from SEA contains the data "SEA:N7HWD-8> Connected to  

          #SEA:N7HWD-7".  This message tells N7ML that he is now connected to  

          another port on the SEA Node named #SEA.  Again, we will talk more  

          about how and why N7ML might want to do this later in the chapter. 

 

 

          The following packet is again from K6RFK to N7GMF and is being  

          digipeated through N7ALW.  This packet indicates that K6RFK is  

          finished talking to N7GMF and wants to Disconnect.  Again we see that  

          we are not hearing K6RFK, rather we are hearing N7ALW as indicated by  

          the asterisk (*) after the callsign. 

 

                    p1 K6RFK>N7ALW*>N7GMF [D] 

 

 

          The following packet is an acknowledgment (or simply called an ACK)  

          that lets K6RFK know that N7GMF has acknowledged the Disconnect  

          request sent above.  K6RFK and N7GMF are no longer Connected. 

 

                    p1 N7GMF>N7ALW*>K6RFK (UA) 

 

 

          As can be seen, all of the above examples were heard on radio port 1 

          of the PK-900.  If a second radio was connected to radio port 2,  

          we would have seen some monitored packets prefaced with a "p2" as  

          well.  See section 4.8 for more information on controlling both  

          radio ports when you are ready. 

 

 

          NOTE:  Some applications software such as PB and PG for Amateur 

                 Satellite use have problems with the port designators "p1" and 

                 "p2" in front of monitored packets.  To disable the port 

                 designators "p1" and "p2" from appearing turn OFF User Bit 19 

                 (UBIT 19) by typing "UBIT 19 OFF <Enter>" at the command  

                 prompt. 

 

 

 

 

 

1/93                                    4-8 

Summary of Contents for PK-900









































































































































































































































































































































































































Reviews:

No comments