manualshive.com logo in svg

Timewave PK-900, Operating Manual, Page: 207 / 392

Share
Download
Timewave PK-900 Operating Manual Download Page 207

________________________________________________________________________________ 

     CFrom all,none,yes/no call1[,call2..] / all,none,yes/no call1[,call2..] 

                                                           Default: all/all 

     Mode: Packet                                          Host: CF 

_________________________________ Parameters: __________________________________ 

 

call   -  all, none, YES list, NO list. 

          List of up to 8 call signs, separated by commas. 

________________________________________________________________________________ 

 

CFROM determines how your PK-900 responds to connect requests from other  

stations on each Radio Port. 

CFROM is set to "all/all" when you first start your PK-900. 

 

To reject all call requests on Radio Port 1, type CFROM NONE.  Your PK-900  

sends the calling station a DM packet, or "busy signal." 

 

To reject all call requests on both Radio Ports, type CFROM NONE/NONE. 

Your PK-900 sends the calling station a DM packet, or "busy signal." 

 

To accept calls from one or more specific stations on Radio Port 2, type CFROM  

/YES (followed by a list of calls signs).  Connects will be accepted from  

stations whose call signs are listed after CFROM YES.  For example: 

 

          cmd:cfrom /yes WX1AAA,WX2BBB,WX3CCC,WX4DDD 

 

To reject calls from one or more specific stations on Radio Port 1, type CFROM  

NO (followed by a list of call signs).  Connect requests will be ignored from  

stations whose call signs are listed after CFROM NO. 

 

You can include optional SSIDs specified as "-n" after the call sign.  If CFROM  

is set to "no W2JUP", connect attempts from all SSIDs of W2JUP (W2JUP-0 through  

W2JUP-15) will be ignored.  If CFROM is set to "yes W2JUP-1", then only W2JUP-1  

will be allowed to connect.  Clear CFROM with "%" "&" or "OFF" as arguments. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1/93                                    A-29 

Summary of Contents for PK-900









































































































































































































































































































































































































Reviews:

No comments