manualshive.com logo in svg

Renesas H8S/2158, User Manual

The Renesas H8S/2158 is a versatile microcontroller with advanced features for embedded system design. Unlock the full potential of this product by downloading the User Manual for free from manualshive.com. This comprehensive manual provides in-depth guidance on programming, configuration, and troubleshooting, ensuring optimal performance.

Share
Download
background image

Index

Rev. 3.00  Jan 25, 2006  page 865 of 872

REJ09B0286-0300

Index

14-Bit PWM Timer (PWMX)................. 273
16-Bit Access Space ............................... 123
16-Bit Count Mode ................................. 335
16-Bit Free-Running Timer (FRT) ......... 287
16-Bit, 2-State Access Space .................. 127
16-Bit, 3-State Access Space .................. 130
256-kbyte Expansion Area...................... 119
8-Bit Access Space ................................. 123
8-Bit PWM Timer (PWM)...................... 261
8-Bit Timer (TMR) ................................. 315
8-Bit, 2-State Access Space .................... 125
8-Bit, 3-State Access Space .................... 126

A/D Conversion Time............................. 706
A/D Converter ........................................ 697
Absolute Address...................................... 46
Acknowledge signal................................ 517
Activation by Interrupt............................ 164
Activation by Software ........................... 164
additional pulse....................................... 271
Address Map............................................. 62
Address Ranges and External Address
Spaces ..................................................... 115
Address Space........................................... 24
Addressing Modes .................................... 44
Advanced Mode................................ 22, 121
Arithmetic Operations Instructions........... 36
Asynchronous Mode ............................... 417

base cycle................................................ 281
Basic Bus Interface ................................. 123
Basic Expansion Area............................. 118
Basic Operation Timing.......... 125, 135, 138
basic pulse............................................... 270
Bit Manipulation Instructions ................... 39
bit rate ..................................................... 405
blanking waveform ................................. 372
Block Data Transfer Instructions .............. 43

Block Transfer Mode ..............................159
Boot Mode ..............................................728
Boundary overflow..................................202
Boundary Scan ........................................756
Branch Instructions ...................................41
Broadcast Commands..............................656
bulk transfer ............................................603
Burst ROM Interface...............................134
Bus Arbitration........................................142
Bus Control .............................................113
Bus Controller .........................................103
Bus Master ..............................................142
Bus Specifications of Basic Bus Interface

................................................................117

Carrier frequency ....................................264
Cascaded Connection ..............................335
CBLANK Output ....................................372
CF Expansion Area (Memory Card Mode)

................................................................121

Chain Transfer.........................................160
Clamp Waveform....................................359
Clock Pulse Generator.............................761
Clocked Synchronous Mode ...................437
Commands ..............................................634
Commands Not Requiring Command
Response .................................................657
Commands with Read Data.............663, 679
Commands with Write Data............669, 683
Commands without Data Transfer ..659, 675
Compare-Match Count Mode .................335
Condition field ..........................................43
Condition-Code Register (CCR) ...............28
Consecutive Data Blocks ........................192
control transfer ........................................602
conversion cycle......................................281
CP Expansion Area (Basic Mode) ..........120
CPU...........................................................17

Summary of Contents for H8S/2158


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for H8S/2158

GE D20MX User Manual preview
D20MX
Brand: GE Pages: 146
Accuphase AD-60 Instruction Manual preview
AD-60
Brand: Accuphase Pages: 2
ADTRAN ATLAS 550 Manual preview
ATLAS 550
Brand: ADTRAN Pages: 2
Acrosser Technology AMB-VDX3H1 Series Quick Start Manual preview
AMB-VDX3H1 Series
Brand: Acrosser Technology Pages: 4
Idis DR-6100 Series Operation Manual preview
DR-6100 Series
Brand: Idis Pages: 86
Paradyne COMSPHERE 3610 Installation Instructions preview
COMSPHERE 3610
Brand: Paradyne Pages: 2
Novus NVIP- NVRA0104/GO User Manual preview
NVIP- NVRA0104/GO
Brand: Novus Pages: 44
TDK HHM Series HHM2245SA1 Specifications preview
HHM Series HHM2245SA1
Brand: TDK Pages: 2
Sans Digital ELITENAS EN104L+(B) Quick Installation Manual preview
ELITENAS EN104L+(B)
Brand: Sans Digital Pages: 9
Inspired Energy ATA004N Operating Instructions preview
ATA004N
Brand: Inspired Energy Pages: 5
Lanpro LP-F22 Series Assembling Instructions preview
LP-F22 Series
Brand: Lanpro Pages: 3
Lefroy Brooks M1-5100 Installation, Operating, & Maintenance Instructions preview
M1-5100
Brand: Lefroy Brooks Pages: 10
SIIG ExpressCard 11-in-1 Reader/Writer Quick Installation Manual preview
ExpressCard 11-in-1 Reader/Writer
Brand: SIIG Pages: 8
Valcom VIP-814 Installation Manual preview
VIP-814
Brand: Valcom Pages: 3
Adaptec RAID 5085 Release Notes preview
RAID 5085
Brand: Adaptec Pages: 2
CAME ZG6 Installation Manual preview
ZG6
Brand: CAME Pages: 14
INGENIA Everest CORE Product Manual preview
Everest CORE
Brand: INGENIA Pages: 58
Kodak X-Omat 1000 Service Manual preview
X-Omat 1000
Brand: Kodak Pages: 86

Brands by name

Popular brands

Load more brands