manualshive.com logo in svg

Renesas H8S/2158, User Manual

The Renesas H8S/2158 is a versatile microcontroller with advanced features for embedded system design. Unlock the full potential of this product by downloading the User Manual for free from manualshive.com. This comprehensive manual provides in-depth guidance on programming, configuration, and troubleshooting, ensuring optimal performance.

Share
Download
background image

Index

Rev. 3.00  Jan 25, 2006  page 867 of 872

REJ09B0286-0300

TEI .............................................. 459, 460
TXI.......................................459, 460. 

See

USBI0 ................................................. 625
USBI1 ................................................. 625
USBI2 ................................................. 625
USBI3 ................................................. 625
WOVI ................................................. 382
WUE15 to WUE8 Interrupts................. 85

Interrupt Control Modes ........................... 90
Interrupt Controller ................................... 73
Interrupt Exception Handling ................... 69
Interrupt Exception Handling Sequence ... 96
Interrupt Exception Handling Vector Table

.................................................................. 86

Interrupt Mask Bit..................................... 28
interrupt transfer ..................................... 603
Interval Timer Mode............................... 381
IrDA........................................................ 456
IRQ15 to IRQ0 Interrupts ......................... 84

KIN9 to KIN0 Interrupts........................... 85

Logic Operations Instructions................... 38
LSI Internal States in Each Operating Mode

................................................................ 780

Master Receive Operation....................... 519
Master Transmit Operation ..................... 517
Medium-Speed Mode ............................. 781
Memory Card Interface........................... 137
Memory Indirect ....................................... 47
MMC Mode ............................................ 656
Mode Transition Diagram............... 718, 779
Module Stop Mode ................................. 787
Multimedia Card Interface (MCIF)......... 627
Multiprocessor Communication Function

................................................................ 431

NMI Interrupt............................................ 84
Normal Mode............................ 20, 122, 157

Number of DTC Execution States...........163
Number of FIFO Bytes............................174

On-Board Programming..........................727
Operating Modes.......................................55
Operation field ..........................................43
Operation Reservation Commands..........513
OUT Token .............................................610
Output Compare......................................301
overrun error ...........................................427

parity error ..............................................427
Pin Arrangement .........................................3
Pin Arrangement in Each Operating Mode .4
Pin Functions...............................................8
PLL Circuit .............................................767
pointer sets ..............................................167
Power-Down Modes................................771
Processing States.......................................50
Program Counter .......................................27
Program/Erase Protection........................737
Program/Program-Verify ........................733
Program-Counter Relative ........................47
Programmer Mode ..................................738
programming units ..................................722
PWM conversion period .........................264
PWM Decoding.......................................358

RAM .......................................................715
RAM-FIFO Unit .....................................167
Register Configuration ..............................25
Register Direct ..........................................45
Register field .............................................43
Register Indirect........................................45
Register Indirect with Displacement .........45
Register Indirect with Post-Increment.......45
Register Indirect with Pre-Decrement.......46
Registers

ABRKCR ...................... 77, 797, 808, 818
ADCR ......................... 702, 802, 813, 822

Summary of Contents for H8S/2158


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for H8S/2158

Panasonic WJ-NV200K Quick Reference Manual preview
WJ-NV200K
Brand: Panasonic Pages: 4
Sun Microsystems Ray 3 Plus Client Getting Started Manual preview
Ray 3 Plus Client
Brand: Sun Microsystems Pages: 6
Harmonic XOS User Manual preview
XOS
Brand: Harmonic Pages: 56
Direct IP IDIS DR-1304P Operation Manual preview
IDIS DR-1304P
Brand: Direct IP Pages: 76
Qlogic QMC2462S Datasheet preview
QMC2462S
Brand: Qlogic Pages: 2
LSI MegaRAID SATA 300-4XLP Quick Installation Manual preview
MegaRAID SATA 300-4XLP
Brand: LSI Pages: 3
8e6 Technologies ER3-100 (5K02-55) Quick Start Manual preview
ER3-100 (5K02-55)
Brand: 8e6 Technologies Pages: 74
Ericsson Marconi OMS 1200 Product Description preview
Marconi OMS 1200
Brand: Ericsson Pages: 136
Jaycar Electronics Duinotech Lilypad Plus XC3920 Quick Start preview
Duinotech Lilypad Plus XC3920
Brand: Jaycar Electronics Pages: 2
ZALMAN ZM-MFC1 Combo User Manual preview
ZM-MFC1 Combo
Brand: ZALMAN Pages: 7
ebm-papst R3G560-AH02-03 Operating Instructions Manual preview
R3G560-AH02-03
Brand: ebm-papst Pages: 13
LaCie FireWire 800 ExpressCard 34 Quick Install Manual preview
FireWire 800 ExpressCard 34
Brand: LaCie Pages: 24
Paradyne 8310 MVLt User Manual preview
8310 MVLt
Brand: Paradyne Pages: 108
Corsair ELITE LCD UPGRADE KIT Manual preview
ELITE LCD UPGRADE KIT
Brand: Corsair Pages: 11
SilverStone SDP12 Quick Start Manual preview
SDP12
Brand: SilverStone Pages: 2
WiebeTech FCDKV4 User Manual preview
FCDKV4
Brand: WiebeTech Pages: 8
Axtrinet APG200 User Manual preview
APG200
Brand: Axtrinet Pages: 49
NovaStar Nova M3 MFN300 Operation Manual preview
Nova M3 MFN300
Brand: NovaStar Pages: 16

Brands by name

Popular brands

Load more brands