Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 2003 / 2018

OmniSwitch 6250 CLI Reference Guide November 2009 page 9 UDLD Commands
efm-oam
port slot/port
[
-port2
] keepalive-interval
seconds
efm-oam port slot/port [ -port2 ] hello-interval seconds
efm-oam port slot/port [ -port2 ] remote-loopback {process | ignore}
efm-oam port slot/port remote-loopback {start | stop}
efm-oam port slot/port [ -port2 ] propagate-events {critical-event | dying-gasp} {enable |
disable}
efm-oam port slot/port [ -port2 ] errored-frame-period [threshold threshold_symbols ] [window
window_frames ] [notify {enable | disable}]
efm-oam port slot/port [ -port2 ] errored-frame [threshold threshold_symbols ] [window
window _ seconds ] [notify {enable | disable}]
efm-oam port slot/port [ -port2 ] errored-frame-seconds-summary [threshold
threshold_seconds ] [window window_seconds ] [notify {enable | disable}]
efm-oam multiple-pdu-count count
efm-oam port slot/port l1-ping [num-frames number ] [delay milliseconds ] [start]
show efm-oam configuration
show efm-oam port [
slot / port1-port2 ] [enable | disable] [active | passive]
show efm-oam port slot/port detail
show efm-oam
port
slot / port [ -port2 ] statistics
show efm-oam
port
statistics
show efm-oam port slot / port remote detail
show efm-oam port slot / port history [log-type { link-fault | errored-frame | errored-frame-
period | errored-frame-seconds | dying-gasp | critical } ]
show efm-oam port slot / port l1-ping detail
clear efm-oam statistics port slot
/
port [ -port2 ]
clear efm-oam log-history port slot/port [ -port2 ]
UDLD Commands
udld {enable | disable}
udld port slot/port[
-port2
]
{enable | disable}
udld port
[
slot/port[ -port2
]]
mode {normal | aggressive}
udld port
[
slot/port[ -port2
]]
probe-timer seconds
no udld port
[
slot/port[ -port2
]]
probe-timer
udld port
[
slot/port[ -port2
]]
echo-wait-timer seconds
no udld port
[
slot/port[ -port2
]]
echo-wait-timer
clear udld statistics [port slot/port]
show udld configuration
show udld configuration port [slot/port
]
show udld statistics port slot/port
show udld neighbor port slot/port
show udld status port [slot/port
]
Port Mapping Commands
port mapping port_mapping_sessionid {enable | disable}
no port mapping port_mapping_sessionid
show port mapping [ port_mapping_sessionid ]
IP Commands
ip interface name [address ip_address ] [mask subnet_mask ] [admin [enable | disable]] [vlan
vid ] [forward | no forward] [local-proxy-arp | no local-proxy-arp] [eth2 | snap] [primary
| no primary]
no ip interface name
ip router primary-address ip_address
ip router router-id ip_address
ip static-route ip_address [mask mask ] gateway gateway [metric metric ]
no ip static-route ip_address [mask mask ] gateway ip_address [metric metric ]
ip route-pref {static | rip | ebgp | ibgp} value
ip default-ttl hops
ping { ip_address | hostname } [count count ] [size packet_size ] [interval seconds ] [timeout
seconds ]
traceroute { ip_address | hostname } [max-hop max_hop_count ]
ip directed-broadcast {on | off}
ip service {all |
service_name | port service_port }
no ip service {all | service_name | port service_port }
ip redist {local | static | rip} into {rip} route-map route-map-name [status {enable | disable}]
no ip redist {local | static | rip} into {rip} [route-map route-map-name ]
ip access-list access-list-name
no ip access-list access-list-name
ip access-list
access-list-name
address
address/prefixLen
[action {permit | deny}]
[redist-control {all-subnets | no-subnets | aggregate}]
no ip access-list access-list-name
address
address/ prefixLen
ip route-map route-map-name [sequence-number number] match ip-nexthop
{access-list-name | ip_address/ prefixLen
[permit | deny]}
no ip route-map route-map-name [sequence-number number] match ip-nexthop
{access-list-name | ip_address/ prefixLen
[permit | deny]}
ip route-map route-map-name [sequence-number number] match ipv6-nexthop
{access-list-name | ipv6_address/prefixLen [permit | deny]}
no ip route-map route-map-name [sequence-number number] match ipv6-nexthop
{access-list-name | ipv6_address/prefixLen [permit | deny]}
ip route-map route-map-name [sequence-number number] match ipv4-interface interface-
name
no ip route-map route-map-name [sequence-number number] match ipv4-interface interface-
name