Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 750 / 2018

Ethernet Port Commands
page 20-78 OmniSwitch 6250 CLI Reference Guide November 2009
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
esmConfTable
esmPortCfgSlot
esmPortCfgIfIndex
esmHybridConfTable
esmHybridPortCfgAutoNegotiation
esmHybridPortCfgFlow
esmHybridPortCfgCrossover
esmHybridPortCfgSpeed
esmHybridPortCfgDuplex
AutoNeg In the row labeled CAP this field displays the valid auto negotiation
configurations for the port. In the row label DEF this field displays the
default auto negotiation settings for the port. The possible values are
EN (enabled) or DIS (disabled).
Flow In the row labeled CAP this field displays the valid flow configurations
for the port. In the row label DEF this field displays the default flow
settings for the port. The possible values are EN (enabled) or DIS (dis-
abled).
Crossover In the row labeled CAP this field displays the valid cross over configu-
rations for the port. In the row label DEF this field displays the default
cross over settings for the port. The possible values are Auto ,
MDI/X/Auto (MDI/MDIX/Auto), or -- (not configurable and/or not
applicable).
Speed In the row labeled CAP this field displays the valid line speed configu-
rations for the port. In the row label DEF this field displays the default
line speed settings for the port. The possible values are 10/100 , 100 ,
1G , 10/100/1G , or Auto .
Duplex In the row labeled CAP this field displays the valid duplex configura-
tions for the port. In the row label DEF this field displays the default
duplex settings for the port. The possible values are Full , Full/Half , or
Auto .
interfaces hybrid autoneg Enables and disables auto negotiation for combo ports.
interfaces hybrid crossover Configures crossover port settings for combo ports.
interfaces hybrid speed Configures interface speed for combo ports.
interfaces hybrid duplex Configures duplex settings for combo ports.
show interfaces hybrid status Displays interface line settings for combo ports.
output definitions (continued)