Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 80 / 2018

Chassis Management and Monitoring Commands
page 2-28 OmniSwitch 6250 CLI Reference Guide November 2009
stack clear slot
Clears the current saved slot information for a switch within a stacked configuration. When the saved slot
information has been cleared via the
stack clear slot command, the corresponding switch will automati-
cally be assigned a unique slot number following a reboot. The command also provides optional syntax for
immediately forcing the corresponding switch into pass-though mode.
stack clear slot slot-number [immediate]
Syntax Definitions
slot-number The current slot position used by the switch (1–8; 1001–1008). Note that
the valid slot number range also includes slot positions 1001 through
1008, reserved for switches in pass-through mode.
immediate Optional command syntax. When immediate is entered in the command
line, the corresponding switch is essentially manually forced into pass-
through mode at the time the command is entered. All traffic on the
switch’s Ethernet ports is stopped. Unprocessed traffic (if applicable)
will continue to be passed through the stacking cables to other switches
in the stack. A limited number of management commands on the switch
are also supported.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
When the stack clear slot command is issued, the boot.slot.cfg file is immediately removed from the
switch’s /flash directory. As a result, no slot assignment information will be found the next time the
switch is booted. Because the switch’s slot will be considered
undefined during the boot process, the
switch is automatically assigned a unique slot number.
•
Primary and secondary management modules cannot be forced into pass-through mode using the
stack clear slot command. If the user attempts to force the secondary management module into pass-
through, the secondary switch will reboot and assume idle status when it comes back up. Meanwhile,
an idle switch within the stack is selected and rebooted; when it comes up it assumes the secondary
role.
Examples
-> stack clear slot 1002
-> stack clear slot 3 immediate
Release History
Release 6.6.1; command was introduced.