Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 745 / 2018

Ethernet Port Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 20-73
show interfaces hybrid flow control
Displays interface flow control wait time settings for combo ports.
show interfaces [slot[/port[-port2]]] hybrid {fiber |copper} flow control
Syntax Definitions
slot Slot number you want to display.
port Port number of the interface you want to display.
port2 Last port number in a range of ports you want to display.
fiber Specifies that the configuration of the SFP port(s) will be displayed.
copper Specifies that the configuration of the copper RJ-45 port(s) will be
displayed.
Defaults
If a specific slot or slot/port number is not entered with this command, the flow control wait tme settings
for all switch combo ports is displayed..
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Use the slot , slot/port , or slot/port-port2 parameters to display the flow control wait time settings for all
ports on a slot, a specific port, or for a range of ports.
Examples
-> show interfaces hybrid fiber flow control
Slot/Port Active Wait time(usec) Cfg-Flow Cfg-Cross
-----------+--------+---------------+--------+-----------
1/25 - 0 Pause MDI
1/26 - 0 Pause MDI
output definitions
Slot/Port Interface slot and port number
Active Interface status.
Wait time Flow control wait time, in microseconds.
Cfg-Flow Flow control status, which can be Pause or Go .
Cfg-Cross The user-configured cross-over setting, which can be Auto , MDI , or
MDIX .