Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual Download Page 100

Page: 100 / 2018

Chassis Management and Monitoring Commands

page 2-48

OmniSwitch 6250 CLI Reference Guide

November 2009

Release History

Release 6.6.1; command was introduced.

Related Commands

output definitions

Model Name

The power supply’s model number.

Description

A description of the associated power supply. This field will reflect the
model name in most cases.

Part Number

The Alcatel-Lucent part number for the power supply.

Hardware Revision

The hardware revision level for the power supply.

Serial Number

The Alcatel-Lucent serial number for the power supply.

Manufacture Date

The date the power supply was manufactured.

Type

The type of power supply. Options include AC or IP.

Location

The location of the power supply. Options include Internal or External.

Operational Status

The operational status of the power supply. Options include UP or
DOWN.

Power Provision

The number of Watts used by this power supply.

show chassis

Displays the basic configuration and status information for the switch
chassis.

Summary of Contents for OmniSwitch 6250



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for OmniSwitch 6250

Reviews:

Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 100 / 2018

Search results

Summary of Contents for OmniSwitch 6250

Reviews: