Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 1790 / 2018

IP Multicast Switching Commands
page 41-72 OmniSwitch 6250 CLI Reference Guide November 2009
-> show ip multicast vlan 1
Status: Enabled
Querying: Disabled
Proxying Disabled
Spoofing: Disabled
Zapping: Disabled
Querier Forwarding: Disabled
Version: 2
Robustness: 2
Query Interval (seconds): 125
Query Response Interval (tenths of seconds): 100
Last Member Query Interval(tenths of seconds):10
Unsolicited Report Interval(seconds): 1
Router Timeout (seconds): 90
Source Timeout (seconds): 30
Output fields are described here:
output definitions
Status Whether the IP Multicast Switching and Routing is Enabled or Dis-
abled (the default status).You can enable or disable IP Multicast
Switching and Routing with the ip multicast status command, which is
described on page 41-3 .
Querying The current state of IGMP querying, which can be Enabled or Dis-
abled (the default status). You can enable or disable IGMP querying
with the ip multicast querying command, which is described on page
41-27 .
Proxying The current state of IGMP proxying on the system, which can be
Enabled or Disabled (the default status) . You can enable or disable
IGMP spoofing with the ip multicast proxying command, which is
described on page 41-35 .
Spoofing The current state of IGMP spoofing on the system, which can be
Enabled or Disabled (the default status) . You can enable or disable
IGMP spoofing with the ip multicast spoofing command, which is
described on page 41-31 .
Zapping The current state of IGMP zapping on the system, which can be
Enabled or Disabled (the default status) . You can enable or disable
IGMP zapping with the ip multicast zapping command, which is
described on page 41-33 .
Querier Forwarding The current state of IGMP querier forwarding on the system, which can
be
Enabled or Disabled (the default status) . You can enable or disable
IGMP Querier forwarding with the ip multicast querier-forwarding
command, which is described on page 41-5 .
Version Displays the default IGMP version, which can be 1, 2 or 3 . Use the ip
multicast version command to modify this parameter.
Robustness Displays the IGMP robustness value, ranging from 1 to 7. (The default
value is 2). Use the ip multicast robustness command to modify this
parameter.