Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 892 / 2018

VLAN Stacking Commands
page 24-30 OmniSwitch CLI Reference Guide November 2009
show ethernet-service vlan
Displays a list of SVLANs configured fro the switch.
show ethernet-services vlan [svid1-[svid2]]
Syntax Definitions
svid1 The VLAN ID number identifying the SVLAN (1–4094).
-svid2 The last VLAN ID number in a range of SVLANs that you want to
specify (e.g. 10-12 specifies VLANs 10, 11, and 12).
Defaults
By default, all SVLANs are displayed if an SVLAN or range of SVLANs is not specified with this
command.
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
Specify a single SVLAN ID or a range of SVLAN IDs to display configuration information for a specific
SVLAN or range of SVLANs.
Examples
-> show ethernet-services vlan
vlan Type name
+--------+------------+-------------------------+
4010 svlan Customer ABC
4011 ipmvlan Video-Service
4020 mgmt Provider Management
4021 svlan Customer XYZ
4030 ipmvlan HBO
-> show ethernet-service vlan 4010
Name : Customer ABC
Traffic Type : svlan
Release History
Release 6.6.1; command was introduced.
output definitions
vlan The SVLAN ID number identifying the instance.
Traffic Type The type of SVLAN ( svlan = customer traffic, mgmt = management
traffic, or ipmvlan = IP Multicast VLAN traffic).
name The user-defined text description for the SVLAN. By default, the
SVLAN ID is specified for the description.