Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 1940 / 2018

802.1X Commands
page 44-14 OmniSwitch 6250 CLI Reference Guide November 2009
802.1x non-supplicant policy
Configures a non-supplicant device classification policy for an 802.1x port. This type of policy does not
perform any authentication. A non-supplicant is a device that does not support using the 802.1x protocol
for authentication.
802.1x slot/port non-supplicant policy {group-mobility | vlan vid | default-vlan | block | captive-
portal}
Syntax Definitions
slot/port The slot and port number of the 802.1x port.
group-mobility Use Group Mobility rules for device classification.
vlan vid Use this VLAN ID number for device classification.
default-vlan Assign supplicant to the default VLAN for the 802.1x port.
block Block supplicant traffic on the 802.1x port.
captive-portal Use Captive Portal for web-based device classification.
Defaults
By default no device classification policies are configured for an 802.1x port.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Because this policy does not use 802.1x or MAC authentication, non-supplicants are only classified for
assignment to non-authenticated VLANs.
•
Note that if a non-supplicant policy is not configured for an 802.1x port, then non-supplicants are auto-
matically blocked from accessing the port.
•
If the captive-portal parameter is specified with this command, then the Captive Portal authentication
policy is applied to non-supplicant traffic. See the 802.1x captive-portal policy authentication
command page for more information.
•
Configuring non-supplicant classification policies is only supported on 802.1x enabled mobile ports.
•
Each 802.1x port can have one supplicant policy and one non-supplicant policy for handling 802.1x
and non-802.1x devices, respectively. Configuring a new supplicant or non-supplicant policy over-
writes any policies that may already exist for the port.
Examples
-> 802.1x 4/1 non-supplicant policy group-mobility default-vlan
-> 802.1x 5/10 non-supplicant policy vlan 500 block
-> 8022.1x 6/1 non-supplicant policy group-mobility vlan 247 block
-> 802.1x 4/10 non-supplicant policy captive-portal