Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 1806 / 2018

IP Multicast Switching Commands
page 41-88 OmniSwitch 6250 CLI Reference Guide November 2009
Release History
Release 6.6.1; command was introduced.
Query Response Interval
(milliseconds) Displays the time (in milliseconds) to reply to an MLD query message.
(The default value is 10000 milliseconds.) You can modify this parame-
ter with the
ipv6 multicast query-response-interval command, which
is described on page 41-53 .
Last Member Query Interval
(milliseconds) Displays the time (in milliseconds) to reply to an MLD query message
sent in response to a leave group message. (The default value is 1000
milliseconds.) You can modify this parameter with the
ipv6 multicast last-member-query-interval command, which is
described on page 41-51 .
Unsolicited Report Interval
(seconds) Displays the time period (in seconds) to proxy any changed MLD
membership state. (The default value is 1 second). You can modify this
parameter with the
ipv6 multicast unsolicited-report-interval com-
mand, which is described on page 41-55 .
Router Timeout (seconds) Displays the MLD router timeout in seconds (The default value is 90
seconds.) You can modify this parameter with the
ipv6 multicast router-timeout command, which is described on page
41-57
Source Timeout (seconds) Displays the IGMP source timeout in seconds (The default is 30 sec-
onds.) You can modify this parameter with the
ipv6 multicast source-timeout command, which is described on page
41-59
output definitions