Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 1052 / 2018

IP Commands
page 29-4 OmniSwitch 6250 CLI Reference Guide November 2009
ip interface
Configures an IP interface to enable IP routing on a VLAN. Without an IP interface, traffic is bridged
within the VLAN or across connections to the same VLAN on other switches.
ip interface name [address ip_address] [mask subnet_mask] [admin [enable | disable]] [vlan vid]
[forward | no forward] [local-proxy-arp | no local-proxy-arp] [eth2 | snap] [primary | no primary]
no ip interface name
Syntax Definitions
name Text string up to 20 characters. Use quotes around string if description
contains multiple words with spaces between them (e.g. “Alcatel-Lucent
Marketing”). Note that this value is case sensitive.
ip_address An IP host address (e.g. 10.0.0.1, 171.15.0.20) to specify the IP router
network.
subnet_mask A valid IP address mask (e.g., 255.0.0.0, 255.255.0.0) to identify the IP
subnet for the interface.
enable Enables the administrative status for the IP interface.
disable Disables the administrative status for the IP interface.
vid An existing VLAN ID number (1–4094).
forward Enables forwarding of IP frames to other subnets.
no forward Disables forwarding of IP frames. The router interface still receives
frames from other hosts on the same subnet.
local-proxy-arp Enables Local Proxy ARP on the specified interface.
no local-proxy-arp Disables Local Proxy ARP on the specified interface.
eth2 Specifies Ethernet-II encapsulation.
snap SNAP encapsulation.
primary Designates the specified IP interface as the primary interface for the
VLAN.
no primary Removes the configured primary IP interface designation for the VLAN.
The first interface bound to the VLAN becomes the primary by default.