Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 820 / 2018

VLAN Management Commands
page 22-20 OmniSwitch 6250 CLI Reference Guide November 2009
show vlan gvrp
Displays a list of VLANs learned through GVRP and their details.
show vlan gvrp [vlan-id | vlan-range]
Syntax Definitions
vlan-id VLAN ID number you want to display (1–4094).
vlan-range The VLAN ID range (e.g., 1-10).
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Use the vlan-id or vlan-range parameter with this command to display the details for a specific VLAN(s).
Examples
-> show vlan gvrp
stree mble
vlan type admin oper 1x1 flat auth ip tag name
----+-----+-----+----+-----+--------+-------+------+-----+--------------
5 gvrp on on on on off NA off GVRP1
6 gvrp on on off off off NA off GVRP12
output definitions
vlan The numerical VLAN ID. Use the vlan command to create or remove
VLANs.
type The type of VLAN ( std, vstk, gvrp , or ipmv )
admin VLAN administrative status: on enables VLAN functions to operate;
off disables VLAN functions without deleting the VLAN. Use the vlan
command to change the VLAN administrative status.
oper VLAN operational status: on (enabled) or off (disabled). The opera-
tional status remains disabled until an active port is assigned to the
VLAN. When the operational status is enabled, then VLAN properties
(e.g. router interfaces, Spanning Tree) are applied to ports and traffic
flow. A VLAN must have an enabled administrative status before it can
become operationally enabled.