Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 799 / 2018

Port Mobility Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 21-31
show vlan port mobile
Displays current status of mobile properties for a switch port.
show vlan port mobile [slot/port]
Syntax Definitions
slot/port The slot number for the module and the physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3). To enter multiple slots and
ports in a single command, use a hyphen to specify a range of ports
(e.g., 3/1-16) and a space to specify multiple slots (e.g., 3/1-16 5/10-20
8/2-9).
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
If a slot/port is not specified, then mobile properties for all ports are displayed.
•
Note that the show vlan port mobile command only displays ports that are mobile or are eligible to
become mobile ports. For example, ports that are part of a link aggregate or are configured for 802.1Q
VLAN tagging are not included in the output of this command.
Examples
-> show vlan port mobile
cfg ignore
port mobile def authent enabled restore bpdu
+-----+------+----+--------+--------+--------+-----+
12/12 on 1 off on off off
12/13 off
12/14 off
12/15 on 10 on-8021x off on off
12/16 on 10 on-8021x on off on
output definitions
port The slot number for the module and the physical mobile port number
on that module.
mobile The mobile status for the port ( on or off ). If set to on , the port is mobile
and eligible for dynamic VLAN assignment. If set to off , the port is
non-mobile and remains only a member of its configured default
VLAN. Use the
vlan port mobile to enable or disable mobility on a
port.
cfg def The configured default VLAN for the port, which is assigned using the
vlan port default command.