Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 1670 / 2018

QoS Policy Commands
page 39-174 OmniSwitch CLI Reference Guide November 2009
show policy classify ip protocol
Specifies an IP protocol for a hypothetical packet to show how the QoS software in the switch will handle
the packet.
show policy classify {l2 | l3 | multicast} [applied] ip protocol protocol
Syntax Definitions
l2 Uses the Layer 2 classifier for the hypothetical packet.
l3 Uses the Layer 3 classifier for the hypothetical packet.
multicast Uses the multicast IGMP classifier for the hypothetical packet.
applied Indicates that only applied policies should be examined.
protocol The IP protocol number, for example, 6.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Use this command to determine if the switch will classify the traffic condition specified and match it to
a policy. By default the classifier only tests pending policies (policies that have not yet been applied).
Use the
applied keyword to test only those policies that have been applied.
•
Use the qos apply command to activate policies.
Examples
-> show policy classify l3 ip protocol 6
See the output example given on page 39-143 for more information about the potential screen display.
Release History
Release 6.6.1; command was introduced.