Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 1010 / 2018

LINK OAM Commands
page 26-42 OmniSwitch 6250 CLI Reference Guide November 2009
show efm-oam port l1-ping detail
Displays the frames lost during a loopback session.
show efm-oam port slot/port l1-ping detail
Syntax Definitions
slot/port Specifies the slot number for the module and the physical port number
on that module (e.g. 3/1 specifies port 1 on slot 3).
Defaults
N/A.
Platforms Supported
OmniSwitch 6250.
Usage Guidelines
The command can also be used even on a port on which LINK OAM is not enabled.
Examples
-> show efm-oam port 1/1 l1-ping detail
frames configured = 5,
frames delay(msec) = 100,
L1 ping status = Sucessful,
frames sent = 4,
frames received = 4,
avg delay (msec) = 5
-> show efm-oam port 1/4 l1-ping detail
frames configured = 5,
frames delay(msec) = 200,
L1 ping status = Successful,
frames sent = 4,
frames received = 2,
avg delay (msec) = 15
Output fields are described here:
output definitions
frames configured Specifies the number of frames that are sent during l1-ping.
delay configured Specifies the delay between transmission of two consecutive frames
during L1 ping.
L1 ping status The status of the L1 ping operation. The status can be Successful ,
Unsuccessful or default.
frames sent Specifies the frames sent during last L1 ping.
frames received Specifies the frames received during last L1 ping.
average delay Specifies the average delay taken by frames during last L1 ping.