Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 599 / 2018

Distributed Spanning Tree Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 16-159
Release History
Release 6.6.1; command was introduced.
Man. Mode The manual mode setting for the port: yes indicates that the blocking or
forwarding state of the port was manually set and the port does not par-
ticipate in the Spanning Tree Algorithm;
no indicates that the Spanning
Tree Algorithm is managing the port state. Configured through the
bridge slot/port mode command.
Config Cost The configured path cost value for this port. Configured through the
bridge 1x1 slot/port path cost command.
Adm Cnx The administrative connection type: PTP, NPT, or AUT . Configured
through the bridge slot/port connection command.
Adm Edg The edge port administrative status: yes indicates that the port is an
admin edge port; no indicates that the port is not an admin edge port .
Configured through the bridge slot/port connection command.
Aut Edg The edge port automatic status: yes indicates that the port is an auto-
matic edge port; no indicates that the port is not an automatic edge port.
Configured through the bridge cist slot/port auto-edge or bridge 1x1
slot/port auto-edge command.
Rstr Tcn The restricted TCN capability: yes indicates that the port supports the
restricted TCN capability; no indicates that the port does not support
the restricted TCN capability. Configured through the bridge cist slot/
port restricted-tcn or bridge 1x1 slot/port restricted-tcn command.
Rstr Role/Root Guard The restricted status of the port: Yes indicates that the port is restricted
from becoming the root; No indicates that the port is not restricted from
becoming the root. Configured through the bridge cist slot/port
restricted-role or bridge 1x1 slot/port restricted-role command.
OS8800 10G Opt. N/A
PVST+ Cfg The type of BPDU used on the port: AUTO indicates that IEEE
BPDUs are used until a PVST+ BPDU is detected; ENA indicates
that PVST+ BPDUs are used; DIS indicates that IEEE BPDUs are
used. Configured through the bridge port pvst+ command.
PVST+ Stat Indicates whether or not the PVST+ interoperability status is enabled
(
ENA ) or disabled ( DIS ) for the port. Configured throught the bridge
mode 1x1 pvst+ command.
output definitions (continued)