Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 1694 / 2018

QoS Policy Commands
page 39-198 OmniSwitch CLI Reference Guide November 2009
show active policy rule
Displays information about pending and applied policy rules that are active (enabled) on the switch.
show active [bridged | routed | multicast] policy rule [rule_name]
Syntax Definitions
bridged Displays active rules that apply to bridged traffic.
routed Displays active rules that apply to routed traffic.
multicast Displays active rules that apply to multicast traffic.
rule_name The name of the rule for which you want to display information; or a
wildcard sequence of characters for displaying information about rules
with similar names. Use an asterisk (*) to indicate a wildcard character.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Use the show policy rule command to display inactive as well as active policy rules.
•
Information for all rules is displayed unless rule_name is specified.
•
Information for all rule types is displayed unless a keyword ( bridged , routed , multicast ) is specified.
•
Applied rules may or may not be active on the switch. Applied rules are inactive if they have been
administratively disabled with the
disable option in the policy rule command.
•
The display may include any of the following characters:
•
A match may show for a rule that is not the highest precedence rule for a particular flow, but only the
rule with the highest precedence is actually applied.
character definition
+ Indicates that the policy rule has been modified or has
been created since the last
qos apply .
- Indicates the policy object is pending deletion.
# Indicates that the policy object differs between the pend-
ing/applied objects.