Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 631 / 2018

Source Learning Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 18-3
•
Select the filtering parameter to set up a denial of service to block potential hostile attacks. Traffic sent
to or from a filtered MAC address is dropped. Select the bridging parameter for regular traffic flow to
or from the MAC address.
•
If a packet received on a port associated with the same VLAN contains a source address that matches a
static MAC address, the packet is discarded.
•
Static MACs are not supported on mobile ports.
•
Only static MAC address entries with a permanent management status are captured when a snapshot
of the switch’s running configuration is taken.
•
Use the mac-address-table aging-time command (see page 18-6 ) to set the aging time value for all
static and dynamically learned MAC addresses. This is the value applied to static MAC addresses
defined using the
mac-address-table timeout form of this command.
Examples
-> mac-address-table permanent 00:00:39:59:f1:0c 4/2 355
-> no mac-address-table
-> no mac-address-table 5/1 755
-> no mac-address-table permanent
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
slMacAddressTable
slMacAddress
slMacAddressManagement
slMacAddressDisposition
mac-address-table aging-time Configures aging time, in seconds, for static and dynamically learned
MAC addresses.
show mac-address-table Displays Source Learning MAC Address Table information.
show mac-address-table count Displays Source Learning MAC Address Table statistics.
show mac-address-table aging-
time Displays the current aging time value for the Source Learning MAC
Address Table.