Yamaha WR450F(S), Руководство по эксплуатации для владельца

Страница: 592 / 754

5 - 44
CHAS
HANDLEBAR
8. Install:
●
Start switch 1
●
Master cylinder 2
●
Master cylinder bracket 3
●
Bolt (master cylinder bracket) 4
●
Clamp 5
NOTE:
●
The start switch and master cylinder bracket
should be installed according to the dimen-
sions shown.
●
Install the bracket so that the arrow mark
a
faces upward.
●
First tighten the bolt on the upper side of the
master cylinder bracket, and then tighten the
bolt on the lower side.
T
R .
.
9 Nm (0.9 m · kg, 6.5 ft · lb)
Zero mm
(Zero in)
Zero mm
(Zero in)
9. Install:
●
“ENGINE STOP” button 1
●
Clutch lever holder 2
●
Bolt (clutch lever holder)
3
●
Hot starter lever holder 4
●
Bolt (hot starter lever holder) 5
●
Clamp 6
NOTE:
●
The “ENGINE STOP” button, clutch lever
holder and clamp should be installed accord-
ing to the dimensions shown.
●
Pass the “ENGINE STOP” button lead in the
middle of the clutch lever holder.
T
R
.
.
4 Nm (0.4 m · kg, 2.9 ft · lb)
T
R
.
.
4 Nm (0.4 m · kg, 2.9 ft · lb)
10. Install:
●
Clutch cable 1
●
Hot starter cable 2
NOTE:
Apply the lithium soap base grease on the
clutch cable end and hot starter cable end.