Yamaha WR450F(S), Руководство по эксплуатации для владельца

Страница: 582 / 754

5 - 39
CHAS
FRONT FORK
4. Tighten:
●
Pinch bolt (handle crown) 1
●
Pinch bolt (under bracket) 2
CAUTION:
Tighten the under bracket to specified
torque. If torqued too much, it may cause
the front fork to malfunction.
5. Install:
●
Brake hose holder
1
●
Caliper 2
●
Bolt (caliper) 3
NOTE:
Fit the brake hose holder cut
a
over the pro-
jection
b
on the front fork and clamp the brake
hose.
6. Install:
●
Brake hose holder 1
●
Bolt (brake hose holder) 2
●
Protector 3
●
Bolt (protector) 4
NOTE:
When installing the brake hose holder, align
the top
a
of the brake hose neck with the
brake hose holder bottom
b
. Then pass the
brake hose 5 in front of the axle boss
c
and
fit it into the hose groove
d
so that the brake
hose does not contact the nut (wheel axle).
T
R
.
.
23 Nm (2.3 m · kg, 17 ft · lb)
T
R
.
.
20 Nm (2.0 m · kg, 14 ft · lb)
T
R
.
.
23 Nm (2.3 m · kg, 17 ft · lb)
T
R .
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
7. Adjust:
●
Rebound damping force
NOTE:
Turn in the damping adjuster 1 finger-tight
and then turn out to the originally set position.