SIZE
FAST HELMET CUT
HIGH CUT
(FAST XP & LE)
SUPER HIGH CUT
(FAST MT)
M
L
XL
XXL
06-16-000 REV. C
FOR FAST HIGH CUT & SUPER HIGH CUT HELMETS
MESH
HELMET COVER
Fold the Mesh Cover’s Rear Velcro Tab over the edge of the
helmet shell and secure it to the newly placed Rear Velcro
Circle. Cut off any excess Velcro on Cover’s Tab.
Push the Rear Fitband Tab
up
and
over
the Cover’s
secured Velcro Tab as shown.
Pull the back of the Mesh Helmet Cover down. Align
both back side edges with the back side edges of the
FAST Side Rails (ARCs) as shown.
ATTACH BACK OF HELMET COVER
SECURE MESH HELMET COVER
Repeat Steps A-C for the opposite side, then
tighten both Rear Fitband Screws.
Loosen the Rear Chinstrap Anchor T-Nut and slide the Rear
Fitband Tab all the way back so that the corner of the helmet
shell is exposed. Clean area with Rubbing Alcohol, then adhere
a Velcro Circle to the exposed helmet shell corner as shown.
Velcro Circle
Location
Rear
Fitband Tab
Anchor T-Nut
Rear Fitband
Tab
Rear Velcro
Tab
Rear Velcro
Tab
INSTALLATION CONTINUED
Cover
Velcro Tabs
FAST Side
Rail (ARC)
