5 - 35
CHAS
FRONT FORK
13. Check:
●
Inner tube smooth movement
Tightness/binding/rough spots
→
Repeat the steps 2 to 12.
14. Compress the front fork fully.
15. Fill:
●
Front fork oil
Until outer tube top surface with recom-
mended fork oil
1
.
CAUTION:
●
Be sure to use recommended fork oil. If
other oils are used, they may have an
excessively adverse effect on the front
fork performance.
●
Never allow foreign materials to enter the
front fork.
Recommended oil:
Suspension oil “01”
16. After filling, pump the damper rod
1
slowly up and down more than 10 times
to distribute the fork oil.
17. Fill:
●
Front fork oil
Until outer tube top surface with recom-
mended fork oil once more.
18. After filling, pump the outer tube
1
slowly
up and down (about 200 mm (7.9 in)
stroke) to distribute the fork oil once
more.
NOTE:
Be careful not to excessive full stroke. A stroke
of 200 mm (7.9 in) or more will cause air to
enter. In this case, repeat the steps 15 to 18.
Содержание WR450F(S)
Страница 288: ...3 54 INSP ADJ BATTERY INSPECTION AND CHARGING Charging method using a variable voltage charger ...
Страница 289: ...3 55 INSP ADJ BATTERY INSPECTION AND CHARGING Charging method using a constant voltage charger ...
Страница 752: ......
Страница 753: ......